Connect your wiring harness to the blower motor that moves air through the heating and A/C system with the Standard Ignition Blower Motor Connector S-1529. This HVAC blower motor connector is cataloged for the 2004-2012 Chevrolet Colorado and the 2004-2012 GMC Canyon.
Signs this connector may need replacing include a burnt or melted plug housing, corroded terminals, or a blower that works only intermittently. If the original connector is the cause, the S-1529 replaces it. Diagnose the circuit before replacing anything, because the blower motor, resistor, or wiring can produce similar symptoms.
Fitment: 2004-2012 Chevrolet Colorado; 2004-2012 GMC Canyon. See the Buyer's Guide tab for engine details.
Interchange: PT1027 · CONB11038 · EC1026 · 88987963
This part cross-references / interchanges with the following part numbers:
What does a blower motor connector do?
It links the vehicle's wiring harness to the blower motor and carries the electrical supply that runs the fan for the heating and A/C system.
What vehicles does the Standard Ignition S-1529 fit?
It is cataloged for the 2004-2012 Chevrolet Colorado and the 2004-2012 GMC Canyon. See the Buyer's Guide tab for engine details.
What signs suggest the connector may need replacing?
Possible signs include a melted or burnt plug housing, corroded terminals, or a blower that cuts in and out. Diagnose the circuit first, because the motor, resistor, or wiring can cause similar symptoms.
Does the S-1529 include lead wires?
The connector arrives factory-assembled. Standard Ignition includes wire connectors and extended lead wires where applicable.
Which part numbers does the S-1529 interchange with?
It interchanges with PT1027, CONB11038, EC1026, and 88987963.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
