Standard Ignition AC67 fuel injection idle air control valve for the 1995 Chevrolet Cavalier 4-cylinder 2.3L and other vehicles meters air around the throttle to hold engine idle speed.
- High-strength stepping motor for high output torque
- Shielded ball bearing in the motor resists environmental contaminants
- Load tested so the actuator delivers more force than the actual load
- Polymer-blended isotropic neodymium/iron/boron magnet for accurate pintle and airflow control
Quick facts
- Part: Standard Ignition AC67 fuel injection idle air control valve
- Fits: 1995 Chevrolet Cavalier 4-cylinder 2.3L and other vehicles
- Condition: New
A failing valve can show up as a rough idle, an idle speed that stays too high or too low, or stalling at a stop. Before you replace the valve, rule out a vacuum leak or a dirty throttle body, since either one also upsets idle. Each engine takes one valve.
Fits
The vehicles it fits include the 1995 Chevrolet Cavalier 4-cylinder 2.3L, the 1995 Pontiac Sunfire 4-cylinder 2.3L and the 1995 Buick Skylark 4-cylinder 2.3L. If your car is not named here, open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Connector shape: Oval
- Terminal quantity: 4
Build and materials
- Condition: New
- Gasket or seal: included
- Country of origin: Mexico
In the box
One idle air control valve with a gasket or seal. Hardware is not included, so plan on new fasteners.
Interchange: 2-19202
21978 · ACVA100 · 17113167 · 17113200
This part cross-references / interchanges with the following part numbers:
21978, ACVA100, 2-19202, 17113167, 17113200
Frequently Asked Questions
Does the Standard Ignition AC67 idle air control valve fit the 1995 Chevrolet Cavalier 4-cylinder 2.3L?
Yes. Standard Ignition AC67 fits the 1995 Chevrolet Cavalier 4-cylinder 2.3L. The "Vehicles it fits" section shows the other cars and engines it covers.
Does this idle air control valve come with a gasket?
Yes. The valve comes with a gasket or seal. Mounting hardware is not included, so have fasteners ready.
What connector does the AC67 idle air control valve use?
Standard Ignition AC67 has an oval connector with 4 terminals.
How is the Standard Ignition AC67 tested?
The AC67 actuator is load tested so it delivers more force than the actual load it faces. The motor also has a shielded ball bearing that resists environmental contaminants.
Is 17113167 a match for the Standard Ignition AC67?
Yes. 17113167 is one of the numbers this valve replaces, and the Interchange line lists the others.
