Standard Ignition UF-291 ignition coil for the 1994-1995 BMW 318i 4-cylinder 1.8L, the 1996-1999 318i 4-cylinder 1.9L and other vehicles turns battery voltage into the high-voltage spark that fires the plug. This distributorless Standard Ignition coil is intended to replace a coil that has worn out.
- Advanced epoxy technology that does not break down in high heat
- Tested in the lab and on vehicles for long-term reliability in all operating conditions
- Round plug-in connector with 6 male pin terminals
- Bolt-on mount with 2 mounting holes and a mounting bracket included
- 12-volt electronic coil that is not oil filled
Quick facts
- Part: Standard Ignition UF-291 ignition coil
- Fits: 1994-1995 BMW 318i 4-cylinder 1.8L, the 1996-1999 318i 4-cylinder 1.9L and other vehicles
- Condition: New
A failing coil can mean a misfire, hard starting or a check engine light, but those signs also come from other ignition parts. With the engine off, look over the coil body and connector for cracks, burn marks or corrosion on the pins; if they look clean, have the misfire diagnosed before you buy a coil.
Fits
It also fits the 1994-1995 BMW 318is 4-cylinder 1.8L, the 1996-1999 318is 4-cylinder 1.9L, the 1995 BMW 318ti 4-cylinder 1.8L and the 1996-1999 318ti 4-cylinder 1.9L. Each of these is a direct-fit OE replacement.
Specifications
Fit and size
- Quantity per vehicle: 1
- Mount type: bolt-on, external mounting position
- Mounting holes: 2
- Voltage: 12 V
- Connector: round, plug-in, female, 1 connector
- Terminals: 6 male pin terminals
Build and materials
- Type: distributorless electronic ignition coil
- Oil filled: no
- Mounting bracket: included
- Condition: New
- Country of origin: China
In the box
One ignition coil with its mounting bracket. This listing is one coil, and one is what a car takes. Mounting hardware, a coil wire and instructions are not included, so plan on new mounting bolts rather than reusing the old ones.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the Standard Ignition UF-291 fit the 1996-1999 BMW 318i 4-cylinder 1.9L?
Yes, the Standard Ignition UF-291 is listed for the 1996-1999 BMW 318i 4-cylinder 1.9L and for the 1994-1995 318i 4-cylinder 1.8L. If your BMW is not named here, look in the "Vehicles it fits" section.
Does the UF-291 ignition coil come with a mounting bracket?
Yes, the Standard Ignition UF-291 includes its mounting bracket. Mounting hardware, a coil wire and instructions are not included.
What kind of connector does this distributorless ignition coil have?
This coil has one round, female plug-in connector with 6 male pin terminals. It is a 12-volt electronic coil with 2 mounting holes.
Is this ignition coil made for high heat?
Yes, this coil uses advanced epoxy technology that does not break down in high heat conditions. It is not an oil-filled coil.
How is the Standard Ignition UF-291 tested?
The UF-291 is tested in the lab and on vehicles for long-term reliability in all operating conditions.
