Standard Ignition UF-666 ignition coil for the 2010-2019 Subaru Outback H6 3.6L and other vehicles sends spark energy to one spark plug. As a coil-on-plug unit it sits directly on the plug and helps restore engine performance when a weak coil is the cause.
- Advanced bobbin technology, silicone magnetic steel core and optimized winding for accurate high-energy output
- Tested for spark energy output, impedance and durability in all operating conditions
- High-dielectric epoxy injected into the case and pulled into vacuum to eliminate air pockets and prevent moisture intrusion or internal energy loss
- High-temp boot prevents high-voltage leaks; stainless-steel spring with internal ferrite noise suppressor prevents radiofrequency interference (RFI)
- 100% pure copper windings in the primary and secondary bobbins for durability and resistance to internal shorts and dielectric breakdown
Quick facts
- Part: Standard Ignition UF-666 ignition coil
- Fits: 2010-2019 Subaru Outback H6 3.6L and other vehicles
- Condition: New
A weak coil can show up as a misfire, rough idle, hard starting or a check engine light. A misfire alone does not prove the coil is at fault, since a worn spark plug can also trigger it. The H6 3.6L has six cylinders and takes six coils, one per cylinder; this listing is one coil.
Fits
Owners of the 2010-2019 Subaru Outback H6 3.6L who need a coil pack can use this one. It also fits the 2010-2019 Subaru Legacy H6 3.6L and the 2010-2014 Subaru Tribeca H6 3.6L.
Specifications
Fit and size
- Quantity per vehicle: 6
- Voltage: 12 V
- Terminals: 3, male blade
- Connector: 1, plug-in, female
- Mount type: bolt-on
Build and materials
- Coil type: electronic, coil-on-plug
- Ignition type: distributorless
- Condition: New
- Country of origin: Poland
In the box
One ignition coil with a mounting bracket and mounting hardware. Instructions and a grease pack are not included.
Interchange: E1166 · IGNB10061 · IC769 · 22433AA611 · 22433AA612
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
E1166, IGNB10061, IC769, UF-666, 22433AA611, 22433AA612
Frequently Asked Questions
Is Standard Ignition UF-666 an ignition coil replacement for the 2010-2019 Subaru Outback H6 3.6L?
Yes. Standard Ignition UF-666 fits the 2010-2019 Subaru Outback H6 3.6L, which takes six coils, one per cylinder.
Is this an ignition coil for the 2010-2019 Subaru Legacy H6 3.6L?
Yes. This coil fits the 2010-2019 Subaru Legacy H6 3.6L, and the engine takes one coil per cylinder.
What comes with Standard Ignition UF-666 besides the coil?
A mounting bracket and mounting hardware come with the coil. Instructions and a grease pack are not included.
What connector does this coil-on-plug ignition coil use?
Standard Ignition UF-666 has one plug-in female connector with three male blade terminals, and it is a 12-volt coil.
How does this coil keep out moisture and radio noise?
High-dielectric epoxy is injected into the case and pulled into vacuum, which removes air pockets and keeps moisture out. The stainless-steel spring with its internal ferrite suppressor prevents RFI.
