Standard Ignition UF874 ignition coil for the 2019-2024 Subaru Forester H4 2.5L and other vehicles steps up battery voltage to fire the spark plug. This is a coil on plug coil for a distributorless ignition, and it bolts on with the mounting bracket included.
- Bobbin technology, a silicone magnetic steel core and optimized winding give accurate, high-energy output
- Tested for spark energy output, impedance and durability in all operating conditions
- High-dielectric epoxy is injected into the case and pulled into vacuum to remove air pockets and keep moisture out
- High-temp boot prevents high-voltage leaks
- Stainless-steel spring with internal ferrite noise suppressor prevents radiofrequency interference (RFI)
- 100% pure copper windings in the primary and secondary bobbins resist internal shorts and dielectric breakdown
Quick facts
- Part: Standard Ignition UF874 ignition coil
- Fits: 2019-2024 Subaru Forester H4 2.5L and other vehicles
- Condition: New
A misfire, rough idle, hard starting or a check engine light can mean a coil is weak. A worn spark plug can also set off a misfire, so these signs alone do not prove the coil is the problem.
Fits
Listed for a wide range of Subaru and Toyota models, this is also an ignition coil for the 2020 Subaru Outback H4 2.5L and the 2024-2025 Subaru Impreza H4 2.5L. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 4
- Voltage: 12 V
- Mount type: bolt on, 1 mounting hole
- Connector: 1, female
- Terminals: 3, male blade
Build and materials
- Coil type: electronic, coil on plug
- Ignition type: distributorless
- Oil filled: no
- Condition: New
- Country of origin: Japan
In the box
One ignition coil with its mounting bracket. This listing holds one coil, and these vehicles take four. Mounting hardware and a coil wire are not included, so plan on new bolts, since the old ones may not be reusable.
Interchange: E1374 · IC981 · 22433AA770
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
E1374, IC981, UF874, 22433AA770
Frequently Asked Questions
Is this Subaru Forester ignition coil replacement right for a 2019-2024 Forester H4 2.5L?
Yes. Standard Ignition UF874 is listed for the 2019-2024 Subaru Forester H4 2.5L, and the engine takes four coils.
Is the Subaru Forester coil pack sold as one coil or a set for the 2019-2024 Forester H4 2.5L?
Standard Ignition UF874 is sold as one coil. The H4 2.5L takes four, so plan the quantity your engine needs.
What connector does the Standard Ignition UF874 ignition coil have?
Standard Ignition UF874 has one female connector with three male blade terminals. It runs on 12 volts.
Which symptoms can point to a weak coil-on-plug ignition coil?
A misfire, rough idle or hard starting can mean the coil is weak. A shop can test the coil to confirm.
Does this Standard Ignition ignition coil come with its mounting bracket and bolts?
This coil includes the mounting bracket, but mounting hardware and a coil wire are not included. Plan on new bolts.
