Standard Ignition Ignition Control Module P/N:LX-382
Standard Motor Products
Standard Ignition LX-211 ignition control module for the 1981-1982 Ford F-150 V8 5.8L, the 1981-1987 F-150 V8 5.0L, the 1984-1987 F-150 V8 5.8L and other vehicles energizes the ignition coils when it receives the crankshaft position sensor signal. It is built for distributorless ignition systems.
When original equipment fails, this module is designed to fix the inherent failure issues. Hard cold starts, misfires or stalling can mean the module is failing. Before you replace it, rule out the crankshaft position sensor, the coils and the wiring, because problems there can look much the same from the driver's seat.
This distributorless ignition control module also fits the 1981-1982 Ford F-250 V8 5.8L, the 1981-1987 F-250 V8 5.0L, the 1984-1987 F-250 V8 5.8L and the 1981-1989 Ford Bronco V8 5.0L or 5.8L. Each engine takes one module, mounted externally. Owners of other Ford, Lincoln and Mercury models can find their year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One ignition control module. Mounting hardware is not included, so plan on new bolts; the old ones may not be reusable.
Product information is for general reference and may contain errors. See our Disclaimer.
Is this the Bronco ignition control module for the 1981-1989 Ford Bronco V8 5.0L or 5.8L?
Yes. Standard Ignition LX-211 is listed for the 1981-1989 Ford Bronco with the V8 5.0L or 5.8L engine. Other vehicles are shown in the "Vehicles it fits" section.
Do I need to buy bolts separately for the LX-211 ignition control module?
Yes. Mounting hardware is not included with Standard Ignition LX-211. This listing is one module that bolts on externally.
What connectors does the LX-211 ignition control module have?
Standard Ignition LX-211 is a 12-volt module with two female connectors and five male blade terminals.
How is this ignition control module tested for heat and cold?
It is durability tested for 500 thermal cycles from -40C to +125C. Copper slug heat sinks carry heat away from the module.
What does this module do when the crankshaft position sensor signal is weak?
The module responds to a weak signal from the crankshaft position sensor and begins energizing the coils immediately, which helps with starting in cold weather.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.