Standard Ignition Ignition Control Module P/N:LX-355
Standard Motor Products
Standard Ignition LX-226 ignition control module for the 1988-1996 Ford F-250 V8 7.5L, the 1991 F-250 6-cylinder 4.9L, the 1992-1996 F-250 V8 5.0L, the 1992-1997 F-250 V8 5.8L and other vehicles energizes the ignition coils on a distributorless ignition system. It is designed to fix the inherent failure issues of the original equipment module.
Hard starting, stalling or a misfire can mean the module is wearing out. These signs alone do not prove it is the problem, since a weak ignition coil can lead to similar symptoms. The 1988-1996 Ford F-250 V8 7.5L takes one module.
This module is listed for a wide range of Ford models, including the 1991 Ford F-150 6-cylinder 4.9L, the 1992-1996 F-150 V8 5.0L or 5.8L, the 1990-1991 Ford Bronco 6-cylinder 4.9L and the 1992-1996 Bronco V8 5.0L or 5.8L. If your vehicle is not named here, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One ignition control module. Mounting hardware is not included, so plan on new bolts.
Product information is for general reference and may contain errors. See our Disclaimer.
Does the Standard Ignition LX-226 work as a Bronco ignition control module for the 1992-1996 Ford Bronco V8 5.0L?
Yes. Standard Ignition LX-226 is listed for the 1990-1991 Ford Bronco 6-cylinder 4.9L and the 1992-1996 Bronco V8 5.0L or 5.8L. For other trucks, check the "Vehicles it fits" section.
Do I need to buy bolts separately for the Standard Ignition LX-226 ignition control module?
Yes. Standard Ignition LX-226 is one bolt-on module and mounting hardware is not included, so plan on new bolts.
What connector does this ignition control module use?
It has one female connector with six male blade terminals. The module runs on 12 volts and mounts externally.
What temperature testing does this ignition control module go through?
It is durability tested for 500 thermal cycles from -40C to +125C. Copper slug heat sinks help carry heat away from the module.
Will this Standard Ignition LX-226 module help with cold-weather starting?
Standard Ignition LX-226 responds to a weak crankshaft position sensor signal and starts energizing the coils right away. That is designed to give better starts in cold weather.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.