Standard Ignition LX-672 ignition control module for the 1986-1989 Mazda 323 4-cylinder 1.6L and other vehicles energizes the ignition coils when it receives the crankshaft position sensor signal. It is designed to fix the inherent failure issues of the original module.
- Copper slug heat sinks that carry heat away so heat does not damage the module
- High-temperature polymer housing that reduces moisture intrusion and minimizes vibration damage
- Double wire bonds for dependable connections under intense vibration
- Durability tested for 500 thermal cycles from -40C to +125C
- Responds to a weak crankshaft position sensor signal and starts energizing the coils at once for cold-weather starts
Quick facts
- Part: Standard Ignition LX-672 ignition control module
- Fits: 1986-1989 Mazda 323 4-cylinder 1.6L and other vehicles
- Condition: New
On a distributorless ignition, a failing module can show up as hard starting, stalling or a misfire. A worn ignition coil, a weak crankshaft position sensor or a damaged wiring connector can be behind those signs too, so find the source before you buy a replacement. This listing is one module, and the engine uses one.
Fits
This module fits the 1986-1989 Mazda 323 4-cylinder 1.6L and the 1988-1989 Mercury Tracer 4-cylinder 1.6L.
Specifications
Fit and size
- Quantity per vehicle: 1
- Voltage: 12 V
- Ignition type: Distributorless
- Terminals: 3, male blade
- Attachment method: Bolt on
Build and materials
- Housing: High-temperature polymer
- Heat sinks: Copper slug
- Condition: New
- Country of origin: Japan
In the box
One ignition control module. The coil, mounting bracket, mounting hardware and instructions are not included, so plan on new bolts.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the Standard Ignition LX-672 fit the 1988-1989 Mercury Tracer 4-cylinder 1.6L?
Yes. Standard Ignition LX-672 fits the 1988-1989 Mercury Tracer 4-cylinder 1.6L. It has three male blade terminals.
Does this Standard Ignition control module come with a coil or mounting bracket?
No. Standard Ignition LX-672 is the module alone. The coil, mounting bracket, mounting hardware and instructions are not included.
What terminals and voltage does this ignition control module use?
It has three male blade terminals and runs on 12 volts. It is made for a distributorless ignition and attaches bolt on.
Will this ignition control module respond to a weak crankshaft position sensor signal?
Yes. When the crankshaft position sensor signal is weak, the module reacts and starts energizing the coils right away, which is meant to help starting in cold weather.
What are the copper slug heat sinks in this module for?
The copper slug heat sinks pull heat away from the module so heat does not damage it. The module also has double wire bonds for its connections to hold up to intense vibration.
