Route power to the ignition and starting circuits at the turn of a key with the Standard Ignition switch US-288, an ignition starter switch from a global manufacturer of original equipment ignition products. It fits many vehicles, among them the 1994-1997 Honda Accord, 1997 Honda Prelude and 1995-1998 Acura TL. See the Buyer's Guide tab for the full list and engine details.
The ignition starter switch is the electrical side of the ignition lock. As the key rotates, it opens and closes the contacts that feed the accessory, run and start circuits. If you need a 1995 Honda Accord ignition switch, US-288 is a direct-fit replacement for that listed application.
Signs this switch may need replacing include a no-crank or no-start condition, stalling or power loss when the key is jostled, and accessories or dash lights that cut in and out. These symptoms can have other causes, so diagnose the circuit first. If a failed switch is the cause, this part replaces it.
Interchange: 18-0441
180441 · CS572 · LS906 · KS6179 · 35130S30003 · 35130S30013 · 35130SV30003 · 35130SV4003
This part cross-references / interchanges with the following part numbers:
What does an ignition starter switch do?
It is the electrical switch operated by the ignition key. As the key turns, it opens and closes contacts that send power to the accessory, run and start circuits.
Is this the right Honda Accord ignition switch for my car?
US-288 is listed for the 1994-1997 Honda Accord. It also fits the 1997 Honda Prelude and the 1995-1998 Acura TL. Check the Buyer's Guide tab to confirm your exact vehicle.
What signs mean the ignition switch may need replacing?
Common signs include no crank or no start, stalling when the key is moved, and flickering dash lights or accessories. Other faults can cause these too, so diagnose the circuit before replacing.
How is the US-288 built and tested?
Standard Ignition tests 100% of these parts to verify mechanical and electrical switching performance. The switch uses copper alloy conductors for strong conductivity with low resistive losses.
What should I know before installing it?
Disconnect the battery before working on ignition wiring. Follow the vehicle service information for removal, installation and any steering column precautions.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
