Standard Ignition Mass Air Flow Sensor P/N:MAS0517
$240.99
(You save)
Help your engine computer get accurate airflow readings with the Standard Ignition Mass Air Flow Sensor MAS0517. This Mazda CX-5 sensor replacement is a direct fit for the 2018-2024 Mazda CX-5, other listed Mazda models and the 2019-2020 Toyota Yaris. It measures the air entering the engine and reports it to the ECU.
100% computer-tested: Each sensor is tested to help ensure the ECU receives accurate airflow readings under hard engine conditions. The ECU needs those readings to balance and deliver the correct air/fuel ratio for clean burns.
100% new: Every unit is a brand-new sensor.
Proprietary sensing elements: Designed to send accurate airflow output to the ECU across a wide range of ambient temperatures.
Strict quality standards: Each sensor is manufactured under tight quality controls.
Specifications: Sold as the sensor only; the housing is not included. It installs bolt-on through 2 bolt holes. It connects through 1 female oval plug-in connector with 3 male pin terminals. One sensor is used per application. Country of origin: Japan.
A failing mass air flow sensor can cause a check engine light, rough idle, hesitation, hard starting or poor fuel economy. These symptoms can have other causes, so diagnose the problem before replacing the sensor.
This part cross-references / interchanges with the following part numbers:
MA1350, 2-14853, PYFS13215, MAS0517, 22204WB002
Frequently Asked Questions
Is this Mazda 3 sensor a complete MAF assembly with housing?
No. MAS0517 is sold as the sensor only, and the housing is not included. It installs bolt-on through two bolt holes.
Will it work as a Yaris sensor replacement?
Yes. It is listed for the 2019-2020 Toyota Yaris with the L4-1.5L engine. One sensor is used per vehicle.
What are signs a mass air flow sensor may need replacing?
Common signs include a check engine light, rough idle, hesitation, hard starting, or poor fuel economy. Other faults can cause these too, so diagnose the problem before replacing the sensor.
How is the MAS0517 tested?
Each sensor is 100% computer-tested to help ensure the ECU receives accurate airflow readings under hard engine conditions. The ECU uses those readings to balance the air/fuel ratio.
What electrical connector does this sensor use?
It has one female oval plug-in connector with three male pin terminals. Country of origin: Japan.
Write a Review
Standard Ignition
Standard Ignition Mass Air Flow Sensor P/N:MAS0517
Mass Air Flow100% computer-tested to ensure the ECU receives accurate airflow readings under hard engine conditions, which are required to balance and deliver the correct air/fuel ratio to the engine...
Mass Air Flow100% computer-tested to ensure the ECU receives accurate airflow readings under hard engine conditions, which are required to balance and deliver the correct air/fuel ratio to the engine...
Mass Air Flow100% computer-tested to ensure the ECU receives accurate airflow readings under hard engine conditions, which are required to balance and deliver the correct air/fuel ratio to the engine...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
