Standard Ignition PBA020 rear parking brake actuator for the 2017-2018 Volvo V60 Cross Country and other vehicles works the rear parking brake to hold the vehicle in place.
- Plug and play, no additional programming required
- Validation process includes 200+ hours of vibration testing and 1000+ hours of extreme heat and cold operation
- New hardware and seal included for the complete repair
Quick facts
- Part: Standard Ignition PBA020 parking brake actuator
- Fits: 2017-2018 Volvo V60 Cross Country and other vehicles
- Position: Rear
- Condition: New
A rear parking brake that will not hold or release, or a parking brake warning light, can be a sign of a failing actuator. Before you replace this actuator, rule out the rear brake hardware and the wiring, because a fault in either can look like a failed actuator.
Fits
The 2017-2018 Volvo V60 Cross Country, 2011-2018 Volvo S60 and 2016-2018 Volvo S60 Cross Country take this actuator, along with other Volvo models. It is a direct-fit OE replacement for these vehicles. To check your own Volvo and its year, look in the "Vehicles it fits" section. The 2011-2018 Volvo S60 takes two, so order two and fit them together.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
- Electrical connector: oval, female, 1 connector
- Electrical terminals: 2, male, blade
Build and materials
- Condition: New
- Country of origin: Germany
In the box
One parking brake actuator; the O-ring and mounting bolts are included.
Interchange: EPB020 · PBC20020 · EPA020 · RBA020 · 30742628 · 31262415
This part cross-references / interchanges with the following part numbers:
EPB020, PBC20020, EPA020, RBA020, PBA020, 30742628, 31262415
Frequently Asked Questions
Does the Standard Ignition PBA020 fit the 2017-2018 Volvo V60 Cross Country?
Yes. Standard Ignition PBA020 is a rear parking brake actuator for the 2017-2018 Volvo V60 Cross Country and also fits other Volvo models; look yours up in the "Vehicles it fits" section.
Does the PBA020 parking brake actuator come with an O-ring and bolts?
Yes. The Standard Ignition PBA020 comes with an O-ring and mounting bolts, and the listing is one actuator.
What kind of electrical connector does this rear parking brake actuator have?
It has one female oval connector. The terminals are two male blade terminals.
Does this parking brake actuator need programming after installation?
No. It is plug and play, and no additional programming is required.
How is this parking brake actuator tested?
Its validation includes 200+ hours of vibration testing, plus 1000+ hours of operation in extreme heat and cold, aimed at stable operation in varied conditions.
