Keep crankcase ventilation working as designed with the Standard Ignition PCV valve, part number V237, which meters blow-by gases out of the crankcase and into the intake, where the engine burns them. It fits many vehicles, among them the 1987-1989 Ford Mustang 2.3L, the 1985-1988 Ford Ranger 2.0L and 1985-1987 Ford Ranger 2.3L, and the 1985-1988 Ford Thunderbird 2.3L. It is a direct-fit replacement for the listed applications; see the "Vehicles it fits" section for the full list.
- Hose connections: two hose connections with a straight nipple orientation, sized for 3/8 in (10 mm) hose.
- Quality control: Standard Ignition is a global manufacturer of emission components and maintains quality control throughout manufacturing, from the individual components to the finished valve.
- Built around OE failures: Drawing on the brand's industry-leading expertise, the valve is designed to address the inherent failure issues found when the original equipment fails.
- In the box: one valve. The listed applications use one per vehicle.
A PCV valve that sticks open or closed may cause a rough idle, higher oil consumption, oil leaks from built-up crankcase pressure, or a whistling noise. These signs can have other causes, so diagnose first. If a failed PCV valve is the cause, the V237 replaces it. Inspect the connecting hoses at the same time.
Country of origin: Mexico.
Interchange: 2-9300
29300 · PCV300 · E43E6A666A1A · E43Z6A666A · E5ZZ6A666A · EV127A
This part cross-references / interchanges with the following part numbers:
PCV300, 2-9300, E43E6A666A1A, E43Z6A666A, E5ZZ6A666A, EV127A
Frequently Asked Questions
What does a PCV valve do?
It meters blow-by gases from the crankcase into the intake so the engine burns them, which helps relieve crankcase pressure. The V237 is a direct-fit replacement for the listed applications.
Is this the right Ford Ranger pcv valve for a 1985-1988 Ranger 2.0L or a 1985-1987 Ranger 2.3L?
Yes. The V237 is listed for the 1985-1988 Ford Ranger 2.0L and the 1985-1987 Ford Ranger 2.3L, at one valve per vehicle. Check the "Vehicles it fits" section to confirm your exact vehicle.
Can I use this as a Ford Mustang pcv valve on a 1987-1989 Mustang 2.3L?
Yes. It is listed for the 1987-1989 Ford Mustang 2.3L, and also for the 1985-1988 Ford Thunderbird 2.3L. The "Vehicles it fits" section shows every listed vehicle.
What size hoses does this PCV valve connect to?
It has two hose connections with a straight nipple orientation, sized for 3/8 in (10 mm) hose.
What are signs a PCV valve may need replacing?
Common signs include a rough idle, rising oil consumption, oil leaks from excess crankcase pressure, or a whistling noise. Diagnose the cause first. If the valve has failed, this replaces it.
