Standard Ignition PSS72 power steering pressure switch for the 2007-2010 Ford Edge and other vehicles signals the PCM when power steering pressure runs above normal.
- Spring and diaphragm switching mechanism that alerts the vehicle's computer to high demand on the power steering system
- Signals the PCM when the power steering system exceeds the normal operating hydraulic pressure
- High-temperature housing designed to withstand harsh engine conditions
- Screw-in mounting with an M14X1.0 thread
- One male blade terminal for the electrical connection
Quick facts
- Part: Standard Ignition PSS72 power steering pressure switch
- Fits: 2007-2010 Ford Edge and other vehicles
- Material: Metal
- Condition: New
A worn switch can show up as an idle that dips or stalls when you turn the wheel, or as a check engine light. Before you replace this one, rule out low fluid, a leaking line or a weak pump as the source of the symptom; a shop can test the switch and its circuit.
Fits
This switch fits the 2007-2010 Ford Edge and the 2007-2010 Lincoln MKX, and each takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Thread size: M14X1.0
- Mounting type: Screw-in
- Terminal: 1 male blade
- Voltage: 12
Build and materials
- Material: Metal
- Finish: Brass
- Condition: New
- Country of origin: Japan
In the box
One power steering pressure switch. Hardware is not included.
Interchange: PS1577 · PS763 · PS364 · 7T4Z3N824A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
PS1577, PS763, PS364, 7T4Z3N824A
Frequently Asked Questions
Is the Standard Ignition PSS72 a switch for the 2007-2010 Ford Edge?
Yes. Standard Ignition PSS72 fits the 2007-2010 Ford Edge, and the vehicle takes one switch.
Will the PSS72 work as a switch for the 2007-2010 Lincoln MKX?
Yes. This power steering pressure switch fits the 2007-2010 Lincoln MKX, which takes one.
What thread size does this power steering pressure switch have?
Standard Ignition PSS72 has an M14X1.0 thread and a screw-in mount. The electrical connection is one male blade terminal, with a voltage of 12.
Does this M14X1.0 pressure switch come with any hardware?
No. The listing is one power steering pressure switch only, and hardware is not included.
Is PS1577 an interchange number for the PSS72?
Yes. PS1577 is listed as an interchange number for Standard Ignition PSS72.
