Standard Ignition VCP110 vacuum pump for the 1996-1999 Chevrolet Tahoe and other vehicles maintains vacuum levels for the brake booster and auxiliary systems. It is a direct-fit OE replacement tested to OE specifications.
- Belt-driven pump with a metal housing
- Single vacuum port with a 7.112 mm (0.28 in) inlet and a 41.4 mm (1.63 in) outlet
- Quality control maintained from components through the finished product
- Sold new, one pump per listing
Quick facts
- Part: Standard Ignition VCP110 vacuum pump
- Fits: the 1996-1999 Chevrolet Tahoe and other vehicles
- Material: Metal housing
- Condition: New
A hard brake pedal or weak power assist can mean the pump is losing vacuum. A leaking vacuum hose gives a similar picture, so those signs alone do not show the pump is at fault, and a shop can test vacuum to tell them apart.
Fits
The 1996-1999 Chevrolet Tahoe, the 1996-1998 Chevrolet C1500 and the 1996-1998 Chevrolet K1500 take this pump, and so do many other vehicles. It is engineered for high-mileage GM and Chevrolet vehicles. If your truck or van is not named here, look it up in the "Vehicles it fits" section. One belt-driven pump goes on each vehicle.
Specifications
Fit and size
- Quantity per vehicle: 1
- Vacuum ports: 1
- Inlet size: 0.28 in (7.112 mm)
- Outlet size: 1.63 in (41.4 mm)
Build and materials
- Drive system: Belt
- Housing material: Metal
- Condition: New
- Country of origin: China
In the box
One vacuum pump. Gaskets, O-rings, hardware, a mounting bracket, a relief valve and a pulley are not included, so plan on new hardware, since the old pieces may not be reusable.
Frequently Asked Questions
Will the Standard Ignition VCP110 work as a 1996-1999 Chevrolet Tahoe vacuum pump?
Yes. The Standard Ignition VCP110 is listed for the 1996-1999 Chevrolet Tahoe, and that vehicle takes one pump.
Does the VCP110 fit the 1996-1998 Chevrolet C1500 or the 1996-1998 Chevrolet K1500?
Yes. Standard Ignition VCP110 is listed for both the 1996-1998 Chevrolet C1500 and the 1996-1998 Chevrolet K1500. For other vehicles, check the "Vehicles it fits" section.
Does the Standard Ignition VCP110 vacuum pump come with a pulley and gaskets?
No. This listing is one vacuum pump; the pulley, gaskets, O-rings, hardware, mounting bracket and relief valve are not included.
What size are the inlet and outlet on this belt-driven vacuum pump?
The Standard Ignition VCP110 has a 0.28 in (7.112 mm) inlet and a 1.63 in (41.4 mm) outlet, with one vacuum port.
How can I tell if my vacuum pump is going bad?
A brake pedal that feels harder than usual or weak power assist can mean the pump is not keeping up. Brake concerns should be checked promptly by a shop.
