Standard Ignition Vapor Canister Purge Solenoid,Vapor Canister Purge Valve P/N:CP780
$37.99
(You save)
Keep your EVAP system routing fuel vapor along its intended path with the Standard Ignition Vapor Canister Purge Solenoid / Vapor Canister Purge Valve (CP780). This electrically operated valve controls the flow of stored fuel vapor from the charcoal canister to the engine's intake so it can be burned during combustion, and it drops in as a direct-fit replacement for the listed applications: the 2011-2015 Chevrolet Cruze [L4-1.8L], 2016 Chevrolet Cruze Limited [L4-1.8L], 2012-2017 Chevrolet Sonic [L4-1.4L], and 2012-2018 Chevrolet Sonic [L4-1.8L].
Controls vapor flow: opens and closes on command from the engine control module to meter fuel vapor from the canister into the intake.
Part of the EVAP system: helps manage stored evaporative emissions rather than venting them to the atmosphere.
Electrically actuated solenoid: responds to the control signal to purge on the appropriate operating conditions.
Signs this valve may need replacing include an illuminated check engine light, EVAP-related trouble codes, or a rough idle. These symptoms can have other causes, so diagnose the source before ordering; if a failed purge valve is the cause, this unit replaces it. This part is listed under both names, Vapor Canister Purge Solenoid and Vapor Canister Purge Valve.
Interchange: Manufacturer part number CP780.
Frequently Asked Questions
What does this part do?
It's an electrically operated purge valve that controls the flow of stored fuel vapor from the charcoal canister to the engine's intake so the vapor can be burned during combustion.
Will it fit my vehicle?
It's a direct-fit replacement for the 2011-2015 Chevrolet Cruze [L4-1.8L], 2016 Cruze Limited [L4-1.8L], 2012-2017 Sonic [L4-1.4L], and 2012-2018 Sonic [L4-1.8L]. See the Buyer's Guide tab to confirm.
What are the signs this valve may need replacing?
Common signs include a check engine light, EVAP-related trouble codes, or a rough idle. These can have other causes, so diagnose the source before replacing.
Is this a solenoid or a valve?
Both names describe the same part. It's listed as a Vapor Canister Purge Solenoid and as a Vapor Canister Purge Valve.
What is the manufacturer part number?
The manufacturer part number is CP780 from Standard Ignition.
Write a Review
STANDARD MOTOR PRODUCTS
Standard Ignition Vapor Canister Purge Solenoid,Vapor Canister Purge Valve P/N:CP780
Canister Purge ValveDirect-fit OE replacement effectively prevents unused fuel vapors in the fuel tank from escaping into the atmosphereHigh-grade industrial plastic withstands low and high engine...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
