Keep fuel vapors flowing where they belong with the Standard Ignition Vapor Canister Purge Valve CP816, which controls the flow of fuel vapor from the EVAP system into the engine intake manifold. It fits many Hyundai and Kia vehicles, among them the 2007-2016 Hyundai Sonata 1.6L / 2.0L / 2.4L, 2010-2020 Kia Optima 1.6L / 2.0L / 2.4L and 2011-2015 Hyundai Tucson 2.0L / 2.4L. See the Buyer's Guide tab for the full list. It is a direct-fit replacement for the listed applications, and each of those applications uses one valve.
Specifications: 2 ports and 1 oval female connector with 2 male blade terminals. Developed and manufactured in North America. Country of origin: Mexico. Standard also catalogs this part under the short description Fuel Vapor Canister.
Signs a purge valve may need replacing include a check engine light, a rough idle, hard starting after refueling, or a fuel odor. These symptoms can have other causes, so diagnose the EVAP system first. If a failed purge valve is the cause, CP816 replaces it.
Interchange: 2-284051
2284051 · CP905 · PV2003 · 314533K600 · 314533K600FFF
This part cross-references / interchanges with the following part numbers:
What does a vapor canister purge valve do?
It controls the flow of fuel vapor from the EVAP system into the engine intake manifold. This helps the EVAP emissions system work as designed.
Does CP816 fit the 2007-2016 Hyundai Sonata 1.6L / 2.0L / 2.4L?
Yes, it is listed for the 2007-2016 Hyundai Sonata 1.6L / 2.0L / 2.4L. It also fits many other Hyundai and Kia models, so check the Buyer's Guide tab for your exact vehicle.
What kind of electrical connection does it have?
It has one oval female connector with two male blade terminals, and the valve has two ports. The connector and terminals are OE-matched for a precise fit.
What are signs the purge valve may need replacing?
Possible signs include a check engine light, rough idle, hard starting after refueling or a fuel odor. These can have other causes, so diagnose the EVAP system before replacing the valve.
Is it built for underhood temperature changes?
Standard uses high-grade materials to protect against the extreme temperature changes found under the hood. The valve is developed and manufactured in North America, and its country of origin is Mexico.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
