Standard Ignition WP-409 windshield wiper switch for the 2011-2018 Jeep Wrangler and other vehicles lets the driver control the wiper functions. If a failed switch is the reason the wipers no longer respond, this one is intended to bring back that control.
- Copper alloy conductors with low resistive losses for consistent electrical conductivity
- Every unit tested for both mechanical and electrical switching performance
- Two wiper speed settings and three delay settings
- Rear window wiper speed setting, plus windshield and rear window washer spray
- Indicator markings on the switch
Quick facts
- Part: Standard Ignition WP-409 windshield wiper switch
- Fits: the 2011-2018 Jeep Wrangler and other vehicles
- Condition: New
Wipers that ignore a selector position, a delay setting that does nothing or washer spray that no longer fires can mean the switch is wearing out. Before replacing it, look at the switch connector with the engine off for corrosion, bent pins or a loose fit, because a fuse or the wiper motor can also be behind a dead wiper.
Fits
This windshield wiper switch is listed for a wide range of Jeep, Dodge and Chrysler models, including the 2011-2018 Jeep Wrangler, the 2012-2017 Jeep Compass and the 2007-2017 Jeep Patriot. The 2011-2018 Jeep Wrangler takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Voltage: 12 V
- Connector: 1 rectangular male connector, 1 cavity
- Terminals: 7 female pin terminals
- Attachment method: direct
- Wiper speed settings: 2
- Wiper delay settings: 3
Build and materials
- Conductors: copper alloy
- Finish: plastic
- Indicator markings: included
- Condition: New
- Country of origin: Taiwan
Interchange: WW409 · 5183957AA · 68003215AA · 68003215AB · 68003215AC · 68003215AD · SW5462 · WS6662
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
WW409, 5183957AA, 68003215AA, 68003215AB, 68003215AC, 68003215AD, SW5462, WS6662
Frequently Asked Questions
Does the Standard Ignition WP-409 work as a Jeep Wrangler windshield wiper switch for the 2011-2018 model years?
Yes, Standard Ignition WP-409 is listed for the 2011-2018 Jeep Wrangler. If your vehicle is a different model, look it up in the "Vehicles it fits" section on this page.
Does this switch control the rear window wiper and washer too?
Yes. Standard Ignition WP-409 includes a rear window wiper speed setting and rear window washer spray, along with the windshield washer spray.
How many speed and delay settings does the WP-409 windshield wiper switch have?
This windshield wiper switch has two wiper speed settings and three delay settings, with indicator markings on the switch.
What connector does this windshield wiper switch use?
Standard Ignition WP-409 has one rectangular male connector with a single cavity and 7 female pin terminals. It runs on 12 V and attaches directly.
How is the Standard Ignition WP-409 tested before it is sold?
Each Standard Ignition WP-409 is 100% tested to verify both mechanical and electrical switching performance. Its conductors are copper alloy, chosen for low resistive losses.
