Standard Ignition FPM137 fuel pump driver module for the 2008-2012 Toyota Tundra V6 4.0L or V8 5.7L regulates voltage to the fuel pump.
Hard starting, stalling or low power can mean the pump is not getting the voltage it needs. Before you replace the module, rule out the fuel pump itself, its wiring and connectors, and the fuse.
This is a direct-fit OE replacement for the 2008-2012 Toyota Tundra V6 4.0L or V8 5.7L and the 2018-2019 Tundra V8 5.7L. One module is needed per vehicle.
One fuel pump driver module with all necessary installation hardware.
Interchange: FPD137 · PDM139 · 8957034060
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does Standard Ignition FPM137 fit the 2008-2012 Toyota Tundra V6 4.0L or V8 5.7L?
Yes. Standard Ignition FPM137 fits the 2008-2012 Toyota Tundra V6 4.0L or V8 5.7L and the 2018-2019 Tundra V8 5.7L, with one module per vehicle.
Does this fuel pump driver module come with installation hardware?
Yes. This fuel pump driver module comes with all necessary installation hardware.
Does the FPM137 fuel pump driver module need programming?
Yes. Standard Ignition FPM137 requires programming.
How can I tell if a fuel pump driver module is going bad?
A stalling engine, hard starting or a drop in power can be tied to the voltage supplied to the fuel pump, though a worn pump or damaged wiring can show the same signs.
Does PDM139 interchange with Standard Ignition FPM137?
Yes. PDM139 is an interchange number for Standard Ignition FPM137, along with FPD137 and 8957034060.
No reviews yet — be the first to review this product.
Write a Review
Standard Motor Products
Standard Motor Products
Standard Motor Products
Standard Motor Products
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
