Dorman 697-936 front right steering knuckle for the 2007-2012 Hyundai Elantra connects the wheel to the suspension.
- Cast iron construction
- Resists rust and corrosion
- Resists cracks
- Rigorous quality inspection to confirm the part meets product standards
Quick facts
- Part: Dorman 697-936 steering knuckle
- Fits: 2007-2012 Hyundai Elantra
- Position: Front right
- Material: Cast iron
- Condition: New
Cracks or bends after a curb strike, pothole or collision, a clunk, or uneven tire wear can involve the knuckle; bushings or alignment can cause the last two too. Check it by eye for cracks with the engine off, and find the cause before replacing it. The front axle has one knuckle per side; this is the right, the left is ordered separately, and both sides are usually replaced together.
Fits
This Dorman steering knuckle is a direct replacement for the original knuckle on the 2007-2012 Hyundai Elantra.
Specifications
Fit and size
- Position: Front right
- Quantity per vehicle: 1 per side
- Caliper mounting hole diameters: 17, 14, 12.2 and 12 mm
- Sensor hole diameter: 17 mm
Build and materials
- Material: Cast iron
- Grade: Standard replacement
- Condition: New
- Country of origin: China
In the box
One steering knuckle. The hub, axle, mounting hardware and instruction manual are not included, so plan on new fasteners; the old ones may not be reusable.
Installation notes
- No special tools are needed for installation.
Interchange: 517162H100 · SK697936
Frequently Asked Questions
Is this the right steering knuckle for the 2007-2012 Hyundai Elantra?
Yes. Dorman 697-936 is the front right steering knuckle for the 2007-2012 Hyundai Elantra. The front left side is a separate part.
Does the front right knuckle come with the hub or mounting hardware?
No. Dorman 697-936 is one steering knuckle only. The hub, axle, mounting hardware and instruction manual are not included.
What size are the caliper mounting holes on this steering knuckle?
The caliper mounting holes measure 17, 14, 12.2 and 12 mm, and the sensor hole is 17 mm.
Can I keep driving with a cracked or bent steering knuckle?
No. A cracked or bent steering knuckle is part of the steering and suspension, so have it inspected and replaced promptly rather than driving on it.
Is 517162H100 an interchange number for this knuckle?
Yes. 517162H100 is listed as an interchange number for Dorman 697-936, along with SK697936.
