Keep your steering tight and responsive with the Beck/Arnley Steering Tie Rod End 101-5650 (also written 1015650), a direct-fit front left inner tie rod end for the 2007-2008 Honda Fit. It links the steering rack to the knuckle so wheel movement follows your input, and it drops in as a direct replacement designed to match OE form, fit, and function for foreign-nameplate applications. See the Buyer's Guide tab for engine details.
Worn tie rod ends can show up as loose or wandering steering, uneven tire wear, or a clunk when turning; if a failed inner tie rod end is the cause, this part replaces it. Because tie rod ends work as a set, have your alignment checked after installation.
Interchange: 61240028 · TI59241PR · 53011SLNA00 · TI59241 · ES4591 · MS60701
This part cross-references / interchanges with the following part numbers:
What vehicle does the Beck/Arnley 101-5650 fit?
It is designed as a direct-fit front left inner tie rod end for the 2007-2008 Honda Fit. Check the Buyer's Guide tab to confirm the fit for your vehicle.
What does a tie rod end do?
It connects the steering rack to the steering knuckle, transferring your steering input to the wheel. A worn one can cause loose steering, wandering, and uneven tire wear.
Is the ball joint pre-greased?
Yes. The ball joint comes pre-greased from Beck/Arnley and uses a full ball stud.
Does it have corrosion protection?
Yes. The tie rod end is coated or plated to help resist corrosion.
Do I need an alignment after installing this tie rod end?
Yes, it's best to have the wheel alignment checked and set after replacing a tie rod end to protect tire wear and maintain proper steering.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
