Quiet a harsh, noisy front ride and keep your steering turning smoothly with the KYB strut mount kit (P/N: SM5510), a direct-fit front strut mount kit for the 2005-2007 Dodge Dakota and 2006-2009 Mitsubishi Raider. Also sold as a suspension strut mount kit, it replaces the old, hardened vibration insulators that transmit road impacts, noise, and vibration into the cabin. See the "Vehicles it fits" section for engine-level fitment.
KYB engineers each mount as an OE-quality replacement designed for the application, so it drops in and works like the original front bearing plate — the steering pivot that supports vehicle weight and is critical to steering feel and wheel alignment.
- Superior rubber isolator: cushions impacts from road bumps to reduce jarring, noise, and vibration that worn mounts pass along.
- Mount bearing: provides smoother steering and helps retain front-end alignment.
- Matched-grade studs and nuts: included for a proper, secure installation.
- OE-quality replacement: designed for each application to optimize front suspension performance.
If a failed strut mount is the source of your front-end noise, clunk on turns, or vibration, this kit replaces it. Replace mounts on both sides together as a matched pair for balanced ride quality.
Interchange: 52013484AA · 52013484AB · 52013484AC · 52855146AB · 55366387AA · 905913
This part cross-references / interchanges with the following part numbers:
52013484AA, 52013484AB, 52013484AC, 52855146AB, 55366387AA, 905913
Frequently Asked Questions
What vehicles does the KYB SM5510 strut mount kit fit?
It is a direct-fit front strut mount for the 2005-2007 Dodge Dakota and 2006-2009 Mitsubishi Raider. Check the "Vehicles it fits" section to confirm the exact fit for your vehicle.
Is this a front or rear strut mount?
This kit is for the front position. The front bearing plate acts as the steering pivot and supports vehicle weight, so it is critical to steering performance and wheel alignment.
What is included with this strut mount kit?
It includes the KYB strut mount with rubber insulator, a mount bearing, and matched-grade studs and nuts for installation.
What are the signs my strut mount may need replacing?
Common signs include front-end noise, a clunk when turning, and vibration transmitted into the cabin as the rubber insulator hardens with age. Diagnose the cause before replacing.
Should I replace both strut mounts at the same time?
Replacing the left and right mounts together as a matched pair is recommended for balanced, even ride quality, though it is not strictly required.
