Keep brake fluid moving where it belongs with the Sunsong brake hose, part number 2201011, built for the front left position. It installs as a direct-fit replacement on the 1980-1989 Ford Bronco, 1980-1983 Ford F-100, 1980-1989 Ford F-150 and 1980-1985 Ford F-250. See the "Vehicles it fits" section for engine details.
A brake hydraulic hose is the flexible link that carries pressurized brake fluid to the wheel's brake assembly while allowing for suspension and steering movement. Sunsong designs and manufactures its own fluid transfer hoses and lines, and it builds each hose for exact form, fit and function on the listed trucks.
- Safety standards: Meets or exceeds DOT, FMVSS 106 and SAE J1401 brake hose standards.
- Hardware as required: Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included where the application calls for them, so wearable pieces are renewed along with the hose.
- Corrosion protection: Tubing is made from high-grade steel and electroplated with zinc to resist rust and corrosion from humidity, road salt, water and grime.
- Pressure tested: Every hose goes through a high-pressure quality-assurance test before it leaves the factory.
Hoses with banjo end fittings come with new copper washers for proper sealing. Signs a brake hose may need replacing include a soft or spongy pedal, fluid seepage at the hose or its fittings, and a cracked, swollen or chafed outer cover. After installation, bleed the brake system following the vehicle's service procedure.
Interchange: 1474-41113 · 150.65032 · 350-54264
147441113 · 15065032 · 35054264 · 18J2040 · 77248 · BH36983 · SP5878 · BHA36983 · H36983 · E0TZ2078A · 36983 · BH103201
This part cross-references / interchanges with the following part numbers:
18J2040, 2201011, 1474-41113, 77248, BH36983, BHA36983, SP5878, 150.65032, H36983, E0TZ2078A, 36983, 350-54264, BH103201
Frequently Asked Questions
What vehicles does this Sunsong brake hydraulic hose fit?
It fits the front left position on the 1980-1989 Ford Bronco, 1980-1983 Ford F-100, 1980-1989 Ford F-150 and 1980-1985 Ford F-250. See the "Vehicles it fits" section for engine details.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, FMVSS 106 and SAE J1401 standards. Each hose is also pressure-tested before it leaves the factory.
Does it come with copper washers or brackets?
Sunsong hoses with banjo end fittings include new copper washers. Brackets, grommets, guards, wire clips and sleeves are supplied where the application requires them.
What are signs a brake hose may need replacing?
Signs include a soft or spongy pedal, fluid leaks at the hose or fittings, or a cracked, bulging or chafed hose cover. Diagnose the brake system before replacing parts.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes per the vehicle's service procedure and confirm a firm pedal before driving.
