Sunsong Brake Hydraulic Hose P/N:2202767
Replace a worn or leaking front right flex line with the Sunsong brake hose, part number 2201211. It is a direct-fit replacement for the 1999-2004 Ford F-250 Super Duty, the 1999-2004 Ford F-350 Super Duty and the 2001-2004 Ford F-250. See the "Vehicles it fits" section for complete application details.
A brake hydraulic hose is the flexible link between the vehicle's rigid brake lines and the brake at the wheel. It carries pressurized brake fluid while flexing with suspension travel and steering. Sunsong is a vertically integrated maker of automotive fluid transfer hoses and lines, and it engineers this Sunsong brake hydraulic hose to deliver exact form, fit and function.
Where a hose uses banjo end fittings, Sunsong includes new copper washers to help seal the connection.
Signs a brake hose may need replacing include a soft or spongy pedal, brake fluid seeping at the hose or its fittings, and a cracked, bulging or chafed outer cover. Have the brake system inspected to confirm the cause. Bleed the system after installation as directed by the vehicle service procedure.
Interchange: 1474-06699 · 150.65132 · 350-54361
147406699 · 15065132 · 35054361 · 18J2062 · 78995 · BH381186 · SP10091 · BHA381186 · H381186 · 70787 · F81A2078GF · F81Z2078CA · BRHF74 · 381186 · BH138926
This part cross-references / interchanges with the following part numbers:
Which position does Sunsong 2201211 fit?
It is cataloged for the front right position on the listed applications: the 1999-2004 Ford F-250 Super Duty, the 1999-2004 Ford F-350 Super Duty and the 2001-2004 Ford F-250.
Does this brake hose come with brackets or clips?
Sunsong includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as each application requires. Hoses with banjo end fittings also come with new copper washers.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards. Each hose is high-pressure tested before it leaves the factory.
What are signs a brake hose may need replacing?
Common signs include a soft or spongy pedal, fluid leaking at the hose or its fittings, and a cracked, bulging or chafed cover. Have the brake system inspected to confirm the cause before replacing parts.
Do I need to bleed the brakes after installing this hose?
Yes. Replacing a brake hose opens the hydraulic system, so bleed the brakes afterward following the vehicle service procedure to remove air from the lines.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.