Keep hydraulic pressure flowing to the rear brakes with the Sunsong brake hose 2201411. This rear outer Brake Hydraulic Hose carries brake fluid through the flexible section of the brake line. It is a direct-fit replacement for the 2008-2017 Mitsubishi Lancer, the 2008-2011 Mitsubishi Outlander, and the 2011 Mitsubishi Outlander Sport. See the "Vehicles it fits" section for engine specifics.
Sunsong is a vertically integrated manufacturer that researches, develops, and builds automotive fluid transfer hoses and lines. It designs each hose to deliver exact form, fit, and function.
- Standards: Sunsong brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards.
- Zinc-plated steel tubing: The tubing is made from high grade steel and electroplated with a zinc coating. The coating provides corrosion and rust resistance against high humidity, road salt, water, and grime.
- Pressure tested: Each hose goes through a high pressure quality assurance test before it leaves the factory.
- Hardware as required: Brackets, grommets, molded plastic guards, wire clips, and protective sleeves are included where the application calls for them. Hoses with banjo end fittings come with new copper washers for sealing.
Signs a brake hose may need replacing include a soft or spongy pedal, fluid seepage at the hose or its fittings, and cracking, swelling, or chafing on the hose. Other brake components can cause similar symptoms, so diagnose the brake system before replacing parts. After installation, bleed the brakes as directed by the vehicle service information.
Interchange: 150.46317 · 350-72059
15046317 · 35072059 · BH621258 · BHA621258 · H621258 · 88989 · 4650A083 · 4650B627 · MN116361 · 682513 · BH383531
This part cross-references / interchanges with the following part numbers:
2201411, BH621258, BHA621258, 150.46317, H621258, 88989, 4650A083, 4650B627, MN116361, 682513, 350-72059, BH383531
Frequently Asked Questions
Where does the Sunsong brake hydraulic hose 2201411 install?
It is cataloged for the rear outer position on the 2008-2017 Mitsubishi Lancer, the 2008-2011 Mitsubishi Outlander, and the 2011 Mitsubishi Outlander Sport.
What standards does this brake hose meet?
Sunsong states that its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards.
What is the tubing made of?
The tubing is high grade steel electroplated with a zinc coating. The coating provides corrosion and rust resistance against humidity, road salt, water, and grime.
Does it come with brackets or washers?
Brackets, grommets, molded plastic guards, wire clips, and protective sleeves are included as required by the application. Hoses with banjo end fittings include new copper washers.
What are signs a brake hose may need replacing?
A soft or spongy pedal, fluid leaks at the hose or fittings, or cracking, swelling, or chafing may indicate a hose problem. Other brake parts can cause similar signs, so diagnose first.
