Keep brake fluid pressure flowing to the front right wheel with the Sunsong brake hose, part number 2201454. This front right brake hydraulic hose is a direct-fit replacement for the 2009-2020 Dodge Journey. See the "Vehicles it fits" section for engine and trim details.
A brake hose is the flexible link between the rigid brake line and the brake at the wheel. It carries hydraulic pressure while allowing for suspension and steering movement. Sunsong is a vertically integrated maker of automotive fluid transfer hoses and lines, and it designs this hose for exact form, fit, and function.
A brake hose may need replacing if you notice a soft or spongy pedal, a cracked, chafed, or bulging hose cover, or brake fluid seeping near the hose ends. If the hose is the cause, this Sunsong brake hydraulic hose replaces it. Bleed the brake system after installation as directed in the vehicle service information.
Interchange: 1474-320939 · 150.67131 · 350-40220
1474320939 · 15067131 · 35040220 · 18J4773 · BH621283 · SP11376 · BHA621283 · 4862210AB · 4862210AC · 68171892AA · 68171892AB · H621283 · 777014 · 682656 · BH383200 · BH143934
This part cross-references / interchanges with the following part numbers:
What vehicle and position does the Sunsong 2201454 fit?
It fits the 2009-2020 Dodge Journey in the front right position. See the "Vehicles it fits" section for engine and trim details.
Does this brake hose come with brackets or clips?
Brackets, grommets, molded plastic guards, wire clips, and protective sleeves are included as required. Hoses with banjo end fittings also include new copper washers.
Which safety standards does this hose meet?
It meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards. Each hose also passes a high-pressure quality assurance test before leaving the factory.
What are signs a brake hose may need replacing?
Signs include a soft or spongy pedal, cracks, chafing or bulging on the hose, and fluid seeping at the ends. Diagnose the cause before replacing parts.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes and top off the fluid after installing the hose, following the vehicle service information.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
