Keep brake fluid reaching the rear right wheel with the Sunsong brake hose, part number 2202792C. This rear right brake hydraulic hose is a direct-fit replacement for the 1997-1999 Ford F-250, 1999-2003 Ford F-150, 2001-2003 Ford Lobo and 2004 Ford F-150 Heritage. See the "Vehicles it fits" section for engine-level fitment.
A brake hose is the flexible link between the rigid brake lines and the brake at the wheel. It carries pressurized brake fluid while allowing for suspension and axle movement. Sunsong is a vertically integrated maker of automotive fluid transfer hoses and lines, and it designs its hoses for exact form, fit, and function.
- Engineered for exact fit: Includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves where the application requires them, so the wearable pieces are renewed along with the hose.
- Standards: Meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards.
- Zinc-plated steel tubing: The tubing is made from high-grade steel and electroplated with zinc for corrosion and rust resistance against high humidity, road salt, water, and grime.
- Pressure-tested: Each hose goes through a high-pressure quality assurance test before it leaves the factory.
Hoses with banjo end fittings include new copper washers for proper sealing. Signs that a brake hose may need replacing include cracking, bulging, or chafing, fluid leaking near the wheel, or a soft pedal. Inspect the brake system to confirm the cause before you replace the hose.
Interchange: 150.65399
BH2202792C · BHA2202792C · H2202792C · 6L3Z2267R · 15065399
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What vehicles does this Sunsong brake hydraulic hose fit?
It is listed for the rear right position on the 1997-1999 Ford F-250, 1999-2003 Ford F-150, 2001-2003 Ford Lobo and 2004 Ford F-150 Heritage. See the "Vehicles it fits" section for engine details.
Does it come with brackets or other hardware?
Brackets, grommets, molded plastic guards, wire clips, and protective sleeves are included where the application requires them. Hoses with banjo end fittings also include new copper washers.
What standards does this brake hose meet?
Sunsong states that its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards.
How is the tubing protected against rust?
The tubing is high-grade steel electroplated with a zinc coating. The coating provides corrosion and rust resistance against humidity, road salt, water, and grime.
What are signs a brake hose may need replacing?
Common signs include cracks, bulges, or chafing on the hose, fluid leaking near the wheel, or a soft pedal. These signs can have other causes, so inspect the brake system first.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review