Keep brake fluid pressure flowing to the wheel with the Sunsong brake hose, part number 2202798. This front left brake hydraulic hose is a direct-fit replacement for the 2006-2019 Toyota RAV4, 2010-2012 Lexus HS250h and 2016-2019 Toyota Mirai. See the "Vehicles it fits" section for engine details.
A brake hose is the flexible link in the hydraulic brake circuit. It carries fluid pressure to the brake at the wheel while letting the wheel move with the suspension and steering. Sunsong is a vertically integrated manufacturer that researches, develops and builds automotive fluid transfer hoses and lines. It designs its hoses for exact form, fit and function.
- Standards: Sunsong brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards.
- Installation pieces: Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as the application requires. They are intended to let you renew the wearable parts along with the hose. Hoses with banjo end fittings come with new copper washers for proper sealing.
- Corrosion protection: Where Sunsong brake hoses use tubing, it is made from high-grade steel and electroplated with a zinc coating. The coating resists corrosion and rust from high humidity, road salt, water and grime.
- Pressure tested: Every hose goes through a high-pressure quality assurance test before it leaves the factory.
Signs a brake hose may need replacing include a cracked, bulging or chafed outer cover, brake fluid seepage at the fittings, a soft or spongy pedal, or the vehicle pulling to one side under braking. Other brake faults can cause similar symptoms, so inspect the system before replacing parts. Bleed the brake system after installation as directed by the vehicle service information.
Interchange: 9094702F98
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Which position does Sunsong 2202798 fit?
It is cataloged as the front left brake hydraulic hose for the listed applications.
Which vehicles does this Sunsong brake hydraulic hose fit?
It fits the 2006-2019 Toyota RAV4, 2010-2012 Lexus HS250h and 2016-2019 Toyota Mirai. See the "Vehicles it fits" section for engine details.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards. Each hose is pressure tested before it leaves the factory.
Are brackets or copper washers included?
Brackets, grommets, guards, wire clips and protective sleeves are included as the application requires. Hoses with banjo end fittings come with new copper washers.
What are signs a brake hose may need replacing?
Common signs include a cracked, bulging or chafed cover, fluid seepage at the fittings, or a soft pedal. Other brake faults can cause similar symptoms, so diagnose the cause before replacing.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review