Renew the flexible front left brake connection with the Sunsong brake hose, part number 2202849. This hydraulic hose carries brake fluid from the rigid brake line to the brake at the wheel, flexing as the suspension and steering move. It is a direct-fit replacement for the front left position on the 2007-2009 Hyundai Santa Fe. See the "Vehicles it fits" section for engine-specific details.
Sunsong is a vertically integrated manufacturer that researches, develops and builds automotive fluid transfer hoses and lines. It designs its products around what installers need and aims to exceed industry quality standards. Each Sunsong brake hydraulic hose is designed for exact form, fit and function.
Hoses with banjo end fittings include new copper washers for proper sealing.
Signs a brake hose may need replacing include a cracked, swollen or chafed outer cover, brake fluid seeping at the fittings, or a soft, spongy pedal. If the hose is the cause, this one replaces it. Bleed the brake system after installation as directed by the vehicle service information.
Interchange: 1474-231793 · 150.51074
BH620954 · SP10950 · BHA620954 · H620954 · 79240 · 587310W000 · 587312B000 · 609963 · BH382813 · BH144126 · 1474231793 · 15051074
This part cross-references / interchanges with the following part numbers:
What does a brake hydraulic hose do?
It is the flexible section of the brake system. It carries brake fluid from the rigid brake line to the brake at the wheel and flexes as the suspension and steering move.
Which vehicle does the Sunsong 2202849 fit?
It is listed for the front left position on the 2007-2009 Hyundai Santa Fe. See the "Vehicles it fits" section for engine-specific details.
Does it come with brackets or washers?
Brackets, grommets, molded guards, wire clips and sleeves are included where the application requires them. Hoses with banjo end fittings also include new copper washers.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, FMVSS 106 and SAE J1401 standards. Each hose is high-pressure tested before it leaves the factory.
What are signs a brake hose may need replacing?
Look for a cracked, bulging or chafed cover, fluid seeping at the fittings, or a soft, spongy pedal. Diagnose the cause first, and bleed the brakes after installing a new hose.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
