Sunsong Brake Hydraulic Hose P/N:2204458
Keep brake pressure flowing to the rear left wheel with the Sunsong brake hose, part number 2202856. This hose is cataloged for the rear left position on the 2007-2012 Hyundai Santa Fe and the 2011-2013 Kia Sorento. See the "Vehicles it fits" section for engine-specific details.
The Sunsong brake hydraulic hose is the flexible link between the rigid brake lines and the wheel brake. It carries hydraulic pressure to the brake while allowing the suspension to move. Sunsong is a vertically integrated maker of automotive fluid transfer hoses and lines, and it precision engineers each hose to exact fit.
Signs a brake hose may need replacing include cracking, bulging or swelling of the outer cover, fluid seepage at the fittings, or a soft or spongy brake pedal. Other brake faults can cause the same symptoms, so inspect the brake system before replacing parts. Bleed the brakes after installation as directed by the vehicle service information.
Interchange: 1474-231789 · 150.51326 · 350-03112
1474231789 · 15051326 · 35003112 · BH620961 · SP10785 · BHA620961 · H620961 · 79247 · 587370W000 · 587372B000 · 587372B010 · 382652 · BH382652 · BH143111
This part cross-references / interchanges with the following part numbers:
Which vehicles does part 2202856 fit?
It is cataloged for the rear left position on the 2007-2012 Hyundai Santa Fe and the 2011-2013 Kia Sorento. See the "Vehicles it fits" section for engine details.
What does a brake hydraulic hose do?
It is the flexible section between the rigid brake lines and the wheel brake. It carries hydraulic pressure to the brake while allowing for suspension movement.
What standards does this hose meet?
Sunsong states its brake hoses meet or exceed DOT, FMVSS 106, and SAE J1401 standards. Each hose is also high-pressure tested before it leaves the factory.
Does it come with mounting hardware?
Sunsong includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as the application requires. Hoses with banjo end fittings include new copper washers.
What are signs my brake hose may need replacing?
Cracks, bulges or swelling in the cover, fluid leaks at the fittings, or a soft or spongy pedal can indicate a worn hose. Other brake faults cause similar symptoms, so diagnose before replacing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.