Keep brake fluid flowing under pressure to the wheel with the Sunsong Brake Hydraulic Hose 2202939, a direct-fit replacement for the 2003-2005 Ford Crown Victoria, 2003-2004 Ford Grand Marquis, 2003-2011 Lincoln Town Car, 2003-2005 Mercury Grand Marquis, and 2003-2004 Mercury Marauder (all engines). This flexible hydraulic hose carries pressurized brake fluid from the vehicle's hard line to the caliper while flexing with suspension and steering movement, so cracking, bulging, leaks, or a soft, spongy pedal are signs the original hose may need replacing.
- Fittings & length: a banjo end fitting (3/8 in) and a female end fitting (10 mm), with a 528 mm / 20.78 in overall length.
- EPDM hose with steel tubing: high-grade steel tubing, electroplated with a zinc coating for corrosion and rust resistance against high humidity, road salt, water, and grime.
- Standards & testing: DOT approved and made to meet or exceed DOT, FMVSS 106, and SAE J1401 standards; each hose is high-pressure quality-assurance tested before leaving the factory.
- Included hardware: bracket included; because this hose uses a banjo end fitting, new copper washers are included to help seal the connection.
Country of origin: Thailand. Manufacturer part number 2202939.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What does this brake hose do?
It carries pressurized brake fluid from the vehicle's hard line to the brake caliper and flexes with suspension and steering movement.
Which vehicles does it fit?
Fits the 2003-2005 Ford Crown Victoria, 2003-2004 Ford Grand Marquis, 2003-2011 Lincoln Town Car, 2003-2005 Mercury Grand Marquis, and 2003-2004 Mercury Marauder (all engines).
What are the fittings and length?
It has a banjo end fitting (3/8 in) and a female end fitting (10 mm), with a 528 mm / 20.78 in overall length.
Are copper washers included?
Yes. Because this hose uses a banjo end fitting, new copper washers are included to help seal the connection. A mounting bracket is also included.
What are signs this hose may need replacing?
Cracks, bulging, brake fluid leaks, or a soft, spongy pedal can be signs a brake hose may need replacing; diagnose the cause before replacing.
Write a Review