Keep brake fluid moving to the front right wheel with this Sunsong brake hose, part number 2202979B. It is a direct-fit replacement for the front right position on the 2003-2009 Chevrolet Express 1500, 2003-2005 Chevrolet Express 2500, 2003-2009 GMC Savana 1500, and 2003-2005 GMC Savana 2500. See the "Vehicles it fits" section for engine details.
A brake hydraulic hose carries pressurized brake fluid from the rigid brake line to the brake at the wheel, flexing as the suspension and steering move. Sunsong is a vertically integrated manufacturer of automotive fluid transfer hoses and lines, and it designs each hose for exact form, fit, and function.
Signs a brake hose may need replacing include a soft or spongy pedal, fluid seeping at the hose or its fittings, and a cracked, bulging, or chafed hose cover. This listing is for one hose for the front right position. Bleed the brake system after installation, following the vehicle service information.
Interchange: BH621678 · BHA621678 · H621678 · 777462
This part cross-references / interchanges with the following part numbers:
Which position does Sunsong brake hydraulic hose 2202979B fit?
It is cataloged for the front right position on the 2003-2009 Chevrolet Express 1500 and GMC Savana 1500, and on the 2003-2005 Chevrolet Express 2500 and GMC Savana 2500.
Does this brake hose come with brackets or other hardware?
Sunsong includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves where the application requires them. Hoses with banjo end fittings also come with new copper washers.
What standards does this brake hose meet?
Sunsong states that its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards. Each hose is pressure tested before it leaves the factory.
What are the signs that a brake hose may need replacing?
A soft or spongy pedal, fluid leaking at the hose or its fittings, or a cracked, bulging, or chafed hose cover can be signs. Inspect the brake system to confirm the cause before replacing parts.
Do I need to bleed the brakes after installing it?
Yes. Replacing a brake hose opens the hydraulic system, so bleed the brakes and check for leaks as directed by the vehicle service information.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
