Keep brake fluid moving from the chassis line to the front wheel brake with this Sunsong brake hose, part number 2203034. It is a front brake hydraulic hose for the 1964-1966 Ford Mustang. See the "Vehicles it fits" section for engine-specific details.
Sunsong is a vertically integrated manufacturer that researches, develops and builds automotive fluid transfer hoses and lines, and it designs its products around what the installer needs. This hose is designed to deliver exact form, fit and function.
- Safety standards: Meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards.
- Hardware as required: Precision engineered to exact fit. Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required, intended to return the wearable parts to original condition. Hoses with banjo end fittings come with new copper washers for proper sealing.
- Corrosion protection: Where tubing is used, Sunsong makes it from high-grade steel electroplated with zinc for corrosion and rust resistance against high humidity, road salt, water and grime.
- Pressure tested: Each hose passes a high-pressure quality assurance test before it leaves the factory.
A flexible brake hose carries brake fluid under pressure while flexing with suspension and steering movement. Signs this part may need replacing include visible cracking, bulging or chafing on the hose, fluid seepage at the fittings, a soft or spongy pedal, or the car pulling to one side under braking. Have the brake system inspected to confirm the cause before you replace any parts.
Interchange: 150.61002 · 350-54012
15061002 · 35054012 · 18J1771 · BH49757 · SP3766 · BHA49757 · H49757 · 88291 · C20Z2078A · 36593 · BH36593
This part cross-references / interchanges with the following part numbers:
18J1771, 2203034, BH49757, BHA49757, SP3766, 150.61002, H49757, 88291, C20Z2078A, 36593, 350-54012, BH36593
Frequently Asked Questions
What vehicle does this Sunsong brake hydraulic hose fit?
Part number 2203034 is cataloged as a front brake hose for the 1964-1966 Ford Mustang. See the "Vehicles it fits" section for engine-specific details.
Does this brake hose meet safety standards?
Yes. Sunsong states its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards.
Does it come with copper washers and mounting pieces?
Hoses with banjo end fittings include new copper washers for proper sealing. Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required.
What are signs a brake hose may need replacing?
Common signs include cracking, bulging or chafing on the hose, fluid seepage at the fittings, a soft or spongy pedal, or pulling under braking. Diagnose the brake system to confirm the cause first.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes according to the vehicle's service procedure after installing the new hose.
