Restore a firm brake pedal and reliable rear hydraulic pressure with the Sunsong Brake Hydraulic Hose 2203043, a rear-position hose that drops in as a direct-fit replacement for the 1963-1982 Chevrolet Corvette (see the Buyer's Guide tab for engine-level fitment). It carries pressurized brake fluid between the rigid line and the caliper or wheel cylinder while flexing with suspension travel.
Signs this hose may need replacing include a soft or spongy pedal, visible cracking or bulging, or fluid seepage at the fittings.
Interchange: 150.62309 · 350-47134
15062309 · 35047134 · 18J91 · 77073 · BH86433 · SP9527 · BHA86433 · H86433 · 77073Z · 357794 · 36827 · BH36827
This part cross-references / interchanges with the following part numbers:
What vehicle does this hose fit?
It is a direct-fit rear brake hydraulic hose for the 1963-1982 Chevrolet Corvette. See the Buyer's Guide tab to confirm the exact application for your vehicle.
What does a brake hydraulic hose do?
It carries pressurized brake fluid between the rigid brake line and the caliper or wheel cylinder while flexing with suspension and steering movement.
What standards does this hose meet?
It meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards, and is high-pressure tested before leaving the factory.
Does it come with hardware?
It includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required. Hoses with banjo end fittings also include new copper washers.
What are signs this hose needs replacing?
A soft or spongy brake pedal, visible cracking or bulging of the hose, or fluid seepage at the fittings can indicate the hose should be replaced.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
