Carry hydraulic brake pressure to the front right wheel with the Sunsong brake hose, manufacturer part number 2203185. This front right brake hydraulic hose is a direct-fit replacement for the 1997-1999 Toyota Avalon, the 1997-1999 Toyota Camry and the 1999 Toyota Solara. See the "Vehicles it fits" section for engine details.
Sunsong researches, develops and manufactures automotive fluid transfer hoses and lines. It designs each product around what the installer needs and aims to deliver exact form, fit and function.
- Precision-engineered fit: Engineered to exact fit, with brackets, grommets, molded plastic guards, wire clips and protective sleeves included where the application requires them. These parts are intended to return the wearable parts to original condition. Hoses with banjo end fittings come with new copper washers for proper sealing.
- Industry standards: Meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards.
- Zinc-electroplated tubing: All tubing is made from high-grade steel and electroplated with a zinc coating. The coating provides corrosion and rust resistance against high humidity, road salt, water and grime.
- Pressure tested: Every hose goes through a high-pressure quality assurance test before it leaves the factory.
A brake hose is the flexible link that carries brake fluid under pressure while letting the wheel move with the suspension and steering. Signs this part may need replacing include:
- A cracked, bulging or chafed hose cover
- Fluid seepage at the fittings
- A soft or spongy pedal
If a failed hose is the cause, this part replaces it. Bleed the brake system after installation, following the vehicle's service information.
Interchange: 150.44069
15044069 · 9008094033 · BH380930
This part cross-references / interchanges with the following part numbers:
150.44069, BH380930, 9008094033
Frequently Asked Questions
Which position does the Sunsong brake hydraulic hose 2203185 fit?
It is cataloged for the front right position on the 1997-1999 Toyota Avalon, the 1997-1999 Toyota Camry and the 1999 Toyota Solara.
What standards does this brake hose meet?
Sunsong states that its brake hoses meet or exceed DOT, FMVSS 106 and SAE J1401 standards. Each hose is high-pressure tested before it leaves the factory.
Does it come with brackets or copper washers?
Brackets, grommets, guards, wire clips and sleeves are included where the application requires them. Hoses with banjo end fittings come with new copper washers.
What are signs a brake hose may need replacing?
Common signs are cracks, bulges or chafing on the hose cover, fluid leaks at the fittings, or a soft pedal. Inspect the brake system to confirm the hose is the cause before you replace it.
Do I need to bleed the brakes after installing it?
Yes. Replacing a hydraulic brake hose opens the system, so bleed the brakes afterward, following the vehicle's service information.
