Keep brake fluid moving from the brake line to the front right wheel with the Sunsong brake hose, part number 2203190. It is a direct-fit replacement for the 1996-2002 Chevrolet Express 1500 and Express 2500 and the 1996-2002 GMC Savana 1500 and Savana 2500, and it installs at the front right position. See the "Vehicles it fits" section for engine-specific details.
Sunsong is a vertically integrated manufacturer of automotive fluid transfer hoses and lines. The company builds its hoses to deliver exact form, fit, and function. This Sunsong brake hydraulic hose is the flexible link in the hydraulic brake system. It carries pressurized brake fluid and allows for suspension and steering movement.
Signs that a brake hose may need replacing include cracking, bulging, or chafing on the outer cover, fluid seeping at the fittings, and a soft or spongy pedal. If the front right hose is the cause, this unit replaces it. Bleed the brake system after installation, following the vehicle service information.
Interchange: 1474-17430 · 150.66075 · 350-47287
147417430 · 15066075 · 35047287 · 18J1653 · 78480 · BH380753 · SP9798 · BHA380753 · H380753 · 22163398 · 380753 · BH138062
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Sunsong 2203190 brake hose fit?
It fits the 1996-2002 Chevrolet Express 1500 and 2500 and the 1996-2002 GMC Savana 1500 and 2500 at the front right position. See the "Vehicles it fits" section for engine details.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards. Each hose is high-pressure tested before it leaves the factory.
What are signs a brake hose may need replacing?
Cracked, bulging, or chafed covers, fluid leaks at the fittings, or a soft or spongy pedal may indicate a hose problem. Other brake parts can cause similar signs, so inspect the system to confirm the cause.
Does it come with copper washers or brackets?
Hoses with banjo end fittings include new copper washers. Brackets, grommets, molded plastic guards, wire clips, and protective sleeves are included as required for the application.
Do I need to bleed the brakes after installing it?
Yes. Replacing a brake hose opens the hydraulic system, so bleed the brakes afterward to remove air from the lines, following the vehicle service information.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
