Sunsong Brake Hydraulic Hose P/N:2205166
Keep brake fluid moving from the chassis to the front brakes with the Sunsong brake hydraulic hose, part number 2203260. This front brake hydraulic hose is a direct-fit replacement for many vehicles, among them the 2001-2005 Dodge Stratus, 2001-2005 Chrysler Sebring and 2000-2005 Mitsubishi Eclipse. See the "Vehicles it fits" section for the full list and for engine and trim details.
A brake hydraulic hose is the flexible link between the rigid brake lines and the brake at the wheel. It carries pressurized brake fluid and flexes as the suspension travels and the wheels steer. Sunsong is a vertically integrated manufacturer of automotive fluid transfer hoses and lines, and it engineers each hose for exact form, fit and function.
Signs a brake hose may need replacing include cracks, bulges or chafing on the outer cover, brake fluid seeping at the hose or its fittings, and a soft or spongy pedal. If a worn front hose is the cause, the Sunsong brake hose 2203260 replaces it. Bleed the brake system after installation, following the vehicle service information.
Interchange: 1474-17126 · 150.46017 · 350-72009
BH620295 · SP10983 · BHA620295 · H620295 · 71072 · MR249972 · 609304 · BH382849 · BH140960 · 147417126 · 15046017 · 35072009
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Sunsong 2203260 fit?
It is listed as a front brake hose for many vehicles, among them the 2001-2005 Dodge Stratus, 2001-2005 Chrysler Sebring and 2000-2005 Mitsubishi Eclipse. See the "Vehicles it fits" section for the full list.
What standards does this brake hose meet?
Sunsong states that its brake hoses meet or exceed DOT, FMVSS 106 and SAE J1401 standards. Each hose is also high-pressure tested before it leaves the factory.
Does it come with brackets or other hardware?
Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included where the application requires them. Hoses with banjo end fittings also include new copper washers.
What are signs a brake hose may need replacing?
Common signs include cracks, bulges or chafing on the hose cover, fluid seeping at the hose or its fittings, and a soft or spongy brake pedal. Diagnose the cause before replacing parts.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes after installation and refill with the fluid type specified in the vehicle's service information.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.