Keep brake fluid flowing to the front wheel brake with the Sunsong brake hose, part number 2203410. This front brake hydraulic hose is a direct-fit replacement for the 1967 Ford Falcon, 1967 Mercury Villager, and 1967 Mercury Voyager. It carries pressurized fluid from the rigid brake line to the wheel and flexes with steering and suspension movement.
Sunsong is a vertically integrated manufacturer that researches, develops, and builds automotive fluid transfer hoses and lines. It designs its hoses for exact form, fit, and function.
- Precision engineered to exact fit: Brackets, grommets, molded plastic guards, wire clips, and protective sleeves are included as required, so the wearable parts can be returned to original condition. Hoses with banjo end fittings come with new copper washers for proper sealing.
- Standards: Meets or exceeds DOT, FMVSS 106, and SAE J1401 standards.
- Corrosion-resistant tubing: Where tubing is used, it is made from high-grade steel electroplated with zinc to resist corrosion and rust from humidity, road salt, water, and grime.
- Pressure tested: Every hose goes through a high-pressure quality assurance test before it leaves the factory.
A brake hose may need replacing if it shows cracking, bulging, or fluid seepage along its length, or if the pedal feels soft or spongy. If a worn hose is the cause, this Sunsong unit replaces it. Bleed the brake system according to the vehicle service information after installation.
Interchange: 150.61084 · 350-54061
18J1774 · BH36602 · SP4308 · BHA36602 · H36602 · 88397 · C70Z2078B · 36602 · BH64844 · 15061084 · 35054061
This part cross-references / interchanges with the following part numbers:
18J1774, 2203410, BH36602, BHA36602, SP4308, 150.61084, H36602, 88397, C70Z2078B, 36602, 350-54061, BH64844
Frequently Asked Questions
What vehicles does this Sunsong brake hydraulic hose fit?
Sunsong 2203410 is a front brake hose listed for the 1967 Ford Falcon, 1967 Mercury Villager, and 1967 Mercury Voyager.
What standards does this brake hose meet?
Sunsong states that its brake hoses meet or exceed DOT, FMVSS 106, and SAE J1401 standards.
Does it come with brackets, clips, or washers?
Brackets, grommets, molded plastic guards, wire clips, and protective sleeves are included as required. Hoses with banjo end fittings come with new copper washers.
What are signs a brake hose may need replacing?
Look for cracking, swelling, or leaking along the hose, or a soft or spongy pedal. Diagnose the cause before replacing anything, because other brake components can produce similar symptoms.
Is the hose tested before it ships?
Yes. Sunsong puts every brake hose through a high-pressure quality assurance test before it leaves the factory.
