Keep brake fluid flowing from the rigid brake line to the wheel with the Sunsong brake hose, part number 2203494, cataloged for the front left position. It is a direct-fit application for the 1995-2007 Ford Taurus, 1996-2001 Ford Sable and 1996-2005 Mercury Sable. See the "Vehicles it fits" section for engine details.
Sunsong is a vertically integrated manufacturer that researches, develops and builds automotive fluid transfer hoses and lines. Its hoses are designed around what the installer needs and are built to deliver exact form, fit and function.
Hoses with banjo end fittings come with new copper washers to help the connection seal properly. A brake hose is the flexible link that carries pressurized brake fluid while letting the wheel move with the suspension and steering. Signs it may need replacing include cracking or bulging along the hose, fluid seeping at the fittings, or a soft or spongy brake pedal.
Interchange: 1474-41029 · 150.61072 · 350-54052
147441029 · 15061072 · 35054052 · 18J1206 · 78734 · BH380420 · SP9678 · BHA380420 · H380420 · 70683 · 1F1Z2078BA · 3F1Z2078AA · 5F1Z2078B · F6DZ2078DC · F7DZ2078AA · XF1Z2078AA · BRHF88 · 380420 · BH133044 · BH138076
This part cross-references / interchanges with the following part numbers:
Which position does Sunsong 2203494 fit?
It is cataloged as the front left brake hydraulic hose for the listed 1995-2007 Ford Taurus, 1996-2001 Ford Sable and 1996-2005 Mercury Sable applications.
What standards does this brake hose meet?
It meets or exceeds DOT, FMVSS 106 and SAE J1401 standards. Each hose is also high-pressure tested before it leaves the factory.
Are copper washers and brackets included?
Sunsong includes new copper washers with its brake hoses that use banjo end fittings. Brackets, grommets, guards, clips and sleeves are supplied as required by the application.
What are signs a brake hose may need replacing?
Cracks, bulges or swelling on the hose, fluid seeping at the fittings, or a soft or spongy pedal are signs the hose may need replacing. Diagnose the cause first, because other brake parts can cause similar symptoms.
Do I need to bleed the brakes after installing it?
Yes. Replacing the hose opens the hydraulic system and lets air in, so bleed the brakes according to the vehicle service information and check for leaks before driving.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
