Sunsong Brake Hydraulic Hose P/N:2203328
Keep brake fluid moving to the front right wheel with the Sunsong brake hose 2203560, a direct-fit replacement for the front right position on the 1996-2003 Toyota RAV4. See the Buyer's Guide tab for engine-specific details. This brake hydraulic hose carries pressurized brake fluid from the rigid brake line to the brake and flexes with steering and suspension movement.
Sunsong is a vertically integrated manufacturer that researches, develops and builds automotive fluid transfer hoses and lines. Its products are designed to deliver exact form, fit and function.
Signs a brake hose may need replacing include cracks, bulges or chafing on the hose, fluid seepage at the fittings, or a soft or spongy brake pedal. If the front right hose is the cause, this part replaces it. Bleed the brake system after installation.
Interchange: 1474-11386 · 073-1696 · 150.44071 · 350-76053
147411386 · 0731696 · 15044071 · 35076053 · 18J1355 · 78551 · BH380901 · SP9810 · BHA380901 · H380901 · 380901 · 9094702781 · 9094702989 · BH138048
This part cross-references / interchanges with the following part numbers:
Will this Sunsong brake hydraulic hose fit my 1996-2003 Toyota RAV4?
It is listed for the 1996-2003 Toyota RAV4 in the front right position. Check the Buyer's Guide tab to confirm the details for your specific vehicle.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, FMVSS 106 and SAE J1401 standards. Each hose is also pressure tested before it leaves the factory.
What are signs a brake hose may need replacing?
Common signs include cracking, bulging or chafing on the hose, brake fluid leaks, or a soft or spongy pedal. Diagnose the cause first, since other brake components can produce similar symptoms.
Are brackets or washers included?
Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required for the application. Hoses with banjo end fittings come with new copper washers.
Do the brakes need to be bled after installing this hose?
Yes. Replacing a hydraulic brake hose opens the system, so the brakes should be bled afterward. Follow the vehicle service information for the correct fluid and bleeding procedure.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.