Sunsong Brake Hydraulic Hose P/N:2205964
Replace a cracked, swollen or seeping line with the Sunsong brake hose 2203657, the flexible hydraulic link that carries pressurized brake fluid between the vehicle's rigid brake line and the brake at the wheel. It is a direct-fit replacement for the listed applications, the 1990-1998 Subaru Legacy and 1993-2001 Subaru Impreza, and is cataloged for the rear / rear-right position. See the Buyer's Guide tab for engine-level details.
Sunsong is a vertically integrated manufacturer of automotive fluid transfer hoses and lines. It builds products around what installers need, is committed to exceeding industry quality standards rather than just meeting them, and designs for exact form, fit and function.
Signs this hose may need replacing include cracks, bulges, fluid seepage at the fittings, or a soft or spongy brake pedal. Other brake faults can cause similar symptoms, so inspect the system before replacing.
Interchange: 1474-17342 · 073-1280 · 150.47015 · 350-13014
147417342 · 0731280 · 15047015 · 35013014 · 18J2768 · 77983 · BH38741 · SP8770 · BHA38741 · H38741 · H620095 · 38741 · 26531AA041 · 26531AA100 · 26531AA110 · X2651AA030 · BH123807
This part cross-references / interchanges with the following part numbers:
What does the Sunsong brake hydraulic hose 2203657 do?
It is the flexible link that carries pressurized brake fluid between the vehicle's rigid brake line and the brake at the wheel. It lets that connection move with the suspension.
Which vehicles does this hose fit?
It is listed for the 1990-1998 Subaru Legacy and the 1993-2001 Subaru Impreza in the rear / rear-right position. See the Buyer's Guide tab for engine-level details.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, FMVSS 106 and SAE J1401 standards. Each hose is also pressure-tested before it leaves the factory.
Are brackets or washers included?
Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required. Hoses with banjo end fittings come with new copper washers.
What are signs a brake hose may need replacing?
Look for cracks, bulges, fluid seepage at the fittings, or a soft or spongy pedal. Other brake faults can cause similar symptoms, so inspect the system before replacing.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.