Sunsong Brake Hydraulic Hose P/N:2202845
Keep brake fluid moving from the hard line to the front brakes with the Sunsong brake hose, part number 2203698. This front Brake Hydraulic Hose is a direct-fit replacement for the 2007-2014 Ford Edge and 2007-2015 Lincoln MKX. See the "Vehicles it fits" section for engine-specific details.
The hose is the flexible link in the brake system. It carries pressurized brake fluid to the brake at the wheel while allowing for steering and suspension movement. Sunsong is a vertically integrated manufacturer of automotive fluid transfer hoses and lines, and it engineers each Sunsong brake hydraulic hose for exact form, fit, and function.
A front brake hose may need replacing if the cover is cracked, bulging, or chafed, if brake fluid seeps at the fittings, or if the pedal feels soft or spongy. Other brake problems can cause the same symptoms, so diagnose the system first. After installing the new hose, bleed the brakes following the vehicle's service procedure.
Interchange: 1474-232878 · 150.61119 · 350-54081
BH621026 · BHA621026 · H621026 · 79712 · 7T4Z2078A · 8T4Z2078A · BRHF33 · 610035 · BH383579 · BH142770 · 1474232878 · 15061119 · 35054081
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Sunsong 2203698 fit?
It is listed as a front brake hydraulic hose for the 2007-2014 Ford Edge and the 2007-2015 Lincoln MKX. Check the "Vehicles it fits" section for engine-specific details.
What standards does this brake hose meet?
Sunsong states that its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards.
Does it come with copper washers and brackets?
Sunsong includes new copper washers with its hoses that use banjo end fittings, for proper sealing. Brackets, grommets, guards, wire clips, and sleeves are included where required.
What are signs a brake hose may need replacing?
Watch for cracks, bulges, or chafing on the hose, fluid seepage at the fittings, or a soft or spongy pedal. Other brake faults can cause similar symptoms, so diagnose the system first.
Do I need to bleed the brakes after installing it?
Yes. Replacing the hose opens the hydraulic system and lets air in. Bleed the brakes and top up the fluid following the vehicle's service information.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.