Keep brake fluid moving to the front left wheel with the Sunsong brake hose, part number 2203907. This front left brake hydraulic hose is a direct-fit replacement for the 1976-1979 Ford F-250 and the 1979 Ford F-350. See the "Vehicles it fits" section for engine-level details. Sunsong is a vertically integrated manufacturer of automotive fluid transfer hoses and lines, and it designs its hoses to deliver exact form, fit, and function.
- Precision-engineered fit: Engineered to exact fit, with brackets, grommets, molded plastic guards, wire clips, and protective sleeves included as required so that wearable parts are returned to original condition.
- Standards compliance: Meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards.
- Corrosion-resistant tubing: Where the hose uses tubing, it is made from high-grade steel and electroplated with a zinc coating. The coating provides corrosion and rust resistance against high humidity, road salt, water, and grime.
- Pressure tested: Each hose goes through a high-pressure quality assurance test before it leaves the factory.
A brake hose is the flexible link that carries pressurized brake fluid from the rigid brake line to the wheel's brake assembly, while allowing for suspension and steering movement. Signs a hose may need replacing include cracked, swollen, or bulging rubber, fluid seepage at the hose or its fittings, and a soft or spongy brake pedal. Where a hose uses banjo end fittings, Sunsong includes new copper washers for proper sealing.
Interchange: 150.65029 · 350-54262
15065029 · 35054262 · 18J103 · 77196 · BH36841 · SP8598 · BHA36841 · H36841 · D6TZ2078M · D7TZ2078E · 36841 · BH102241 · BH97838
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What vehicles does Sunsong 2203907 fit?
It fits the front left position on the 1976-1979 Ford F-250 and the 1979 Ford F-350. See the "Vehicles it fits" section for engine-level details.
What standards does this Sunsong brake hydraulic hose meet?
Sunsong states that its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards.
What are signs a brake hose may need replacing?
A worn hose can show cracked, swollen, or bulging rubber, fluid leaks at the hose or fittings, or a soft or spongy pedal. These signs have other possible causes, so diagnose the problem before you replace parts.
Does the hose come with brackets or washers?
Brackets, grommets, molded plastic guards, wire clips, and protective sleeves are included as required for the application. Hoses with banjo end fittings include new copper washers.
Do I need to bleed the brakes after installing a new hose?
Yes. Replacing a brake hose opens the hydraulic system, so the brakes must be bled afterward. Follow the vehicle service information for the correct procedure and brake fluid.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review