Keep brake fluid moving under pressure to the front brakes with this Sunsong brake hose, part number 2204177. This front brake hydraulic hose is a direct-fit replacement for the 2000-2005 Chevrolet Blazer and 2000-2001 GMC Jimmy. See the "Vehicles it fits" section for engine details.
Sunsong is a vertically integrated manufacturer that researches, develops, and builds automotive fluid transfer hoses and lines. It designs its products around what the installer needs, aiming for exact form, fit, and function.
- Precision engineered to fit: Includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required, so the wearable components are returned to original condition. Hoses with banjo end fittings come with new copper washers for proper sealing.
- Safety standards: Built to meet or exceed DOT, FMVSS 106, and SAE J1401 standards.
- Zinc-plated tubing: Where tubing is used, it is made from high-grade steel and electroplated with zinc for corrosion and rust resistance against high humidity, road salt, water, and grime.
- Pressure tested: Every hose goes through a high-pressure quality assurance test before it leaves the factory.
A brake hose may need replacing if the pedal feels soft or spongy, if brake fluid seeps at the hose or its fittings, or if the outer cover is cracked, swollen, or chafed. If a worn front hose is the cause, this Sunsong brake hydraulic hose replaces it. Bleed the brake system after installation.
Interchange: 1474-02670 · 150.66092 · 350-47301
147402670 · 15066092 · 35047301 · 18J1630 · 78841 · BH381342 · SP10251 · BHA381342 · H381342 · 15158651 · 381342 · BH142143
This part cross-references / interchanges with the following part numbers:
18J1630, 2204177, 1474-02670, 78841, BH381342, BHA381342, SP10251, 150.66092, H381342, 15158651, 381342, 350-47301, BH142143
Frequently Asked Questions
Which vehicles does this front brake hose fit?
It fits the 2000-2005 Chevrolet Blazer and the 2000-2001 GMC Jimmy. Check the "Vehicles it fits" section for engine details.
What standards does Sunsong 2204177 meet?
Sunsong states that its brake hoses meet or exceed DOT, FMVSS 106, and SAE J1401 standards. Each hose is high-pressure tested before it leaves the factory.
Does it come with copper washers and brackets?
Hoses with banjo end fittings include new copper washers for proper sealing. Brackets, grommets, guards, wire clips, and sleeves are included where the application requires them.
What are signs that a brake hose may need replacing?
A soft or spongy pedal, fluid leaking at the hose or its fittings, or a cracked, bulging, or chafed cover may indicate a worn hose. Diagnose the cause before you replace any parts.
Do I need to bleed the brakes after installing it?
Yes. Replacing a brake hose opens the hydraulic system, so the brakes must be bled to remove air. Follow the vehicle service information for the procedure and the fitting torque.
