The Sunsong Brake Hydraulic Hose 2204318 carries pressurized brake fluid from the chassis hard line to the caliper while flexing with suspension and steering travel, and it drops in as a direct-fit replacement for the 2003-2011 Honda Element in the front-right position. See the Buyer's Guide tab for engine-level detail.
- Precision engineered for exact fit: includes the brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required so the wearable hardware is restored to original condition.
- Meets or exceeds DOT, FMVSS 106, and SAE J1401 standards.
- Corrosion-resistant tubing: made from high-grade steel and electroplated with a zinc coating for superior corrosion and rust resistance against high humidity, road salt, water, and grime.
- Factory-tested: subjected to a high-pressure quality assurance test before leaving the factory for trouble-free installation and operation. Banjo-end hoses include new copper washers to ensure proper sealing.
Signs a brake hose may need replacing include a soft or spongy pedal, visible fluid seepage, or cracking, bulging, or chafing along the hose. If a failing front-right hose is the cause, this replaces it; diagnose the system before installing.
Interchange: 1474-92506 · 150.40099 · 350-59072
18J1929 · 78979 · BH620400 · SP10396 · BHA620400 · H620400 · 01464SCVA00 · 381598 · BH381598 · BH141308 · 147492506 · 15040099 · 35059072
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What does this brake hydraulic hose do?
It carries pressurized brake fluid from the chassis hard line to the caliper while flexing with suspension and steering movement, giving the hydraulic system a durable, pressure-tight flexible link.
Will this fit my vehicle?
It's a direct-fit replacement for the 2003-2011 Honda Element in the front-right position. Check the Buyer's Guide tab and confirm fitment for your vehicle before ordering.
What standards does this hose meet?
Sunsong states each brake hose meets or exceeds DOT, Federal Motor Vehicle Safety Standard FMVSS 106, and SAE J1401 standards, and is high-pressure tested before leaving the factory.
What is the tubing made of?
The tubing is manufactured from high-grade steel and electroplated with a zinc coating for superior corrosion and rust resistance against high humidity, road salt, water, and grime.
What are signs my brake hose needs replacing?
Common signs include a soft or spongy brake pedal, visible fluid seepage, or cracking, bulging, or chafing on the hose. Diagnose the cause before replacing.
Write a Review