Keep hydraulic pressure flowing to the wheel with the Sunsong brake hose 2204634, a front left brake hydraulic hose designed to deliver exact form, fit, and function. It is a direct-fit replacement for the 2004-2012 Chevrolet Malibu, 2005-2010 Pontiac G6, and 2007-2009 Saturn Aura. See the "Vehicles it fits" section for engine-specific details.
A brake hose is the flexible section of the hydraulic brake system. It carries brake fluid from the rigid brake line to the wheel brake while letting the suspension and steering move. Sunsong is a vertically integrated manufacturer that researches, develops, and builds automotive fluid transfer hoses and lines, and it designs its products around what installers need.
Signs that a brake hose may need replacing include a soft or spongy pedal, brake fluid leaking at the hose or its fittings, and a cracked, swollen, or chafed hose cover. If the front left hose is the cause, this Sunsong brake hydraulic hose replaces it. Consult the vehicle service information for the correct fasteners, whether they may be reused, and the bleeding procedure.
Interchange: 176-1201 · 1474-08533 · 150.62120 · 350-47068
1761201 · 147408533 · 15062120 · 35047068 · 18J4209 · BH620474 · SP10811 · BHA620474 · H620474 · 71232 · 15806767 · 22729634 · 25874780 · 382678 · BH382678 · BH141158
This part cross-references / interchanges with the following part numbers:
Which position does Sunsong 2204634 fit?
It is cataloged for the front left position on the 2004-2012 Chevrolet Malibu, the 2005-2010 Pontiac G6, and the 2007-2009 Saturn Aura.
What standards does this brake hose meet?
Sunsong states that its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards.
Does it come with brackets, clips, or washers?
Brackets, grommets, molded plastic guards, wire clips, and protective sleeves are included as the application requires. Hoses with banjo end fittings include new copper washers.
What are signs of a failing brake hose?
Common signs include a soft or spongy pedal, fluid leaking at the hose or its fittings, and a cracked, swollen, or chafed hose. Diagnose the cause before you replace parts.
Do I need to bleed the brakes after installing it?
Yes. Replacing a brake hose opens the hydraulic system, so the brakes must be bled afterward. Follow the vehicle service information for the correct procedure and fluid.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
