Sunsong Brake Hydraulic Hose P/N:2205964
Keep brake fluid moving between the rigid brake line and the brake at the wheel with the Sunsong brake hose 2204832, a front right brake hydraulic hose for the 2004-2006 Lexus RX330, 2005-2007 Toyota Highlander, 2006-2008 Lexus RX400H and 2007-2009 Lexus RX350. Sunsong designs it for exact form, fit and function on these listed applications. See the Buyer's Guide tab for engine specifics.
Sunsong is a vertically integrated manufacturer that researches, develops and builds automotive fluid transfer hoses and lines. It focuses on what the installer needs and aims to exceed industry quality standards, not just meet them.
Where banjo end fittings are used, new copper washers are included for proper sealing. Signs a brake hydraulic hose may need replacing include cracks, bulges or chafing on the hose, brake fluid seepage at the fittings, or a soft or spongy pedal. Inspect the brake system to confirm the cause before replacing parts.
Interchange: 1474-08259 · 073-1870 · 150.44081 · 350-76060
147408259 · 0731870 · 15044081 · 35076060 · BH620650 · SP11007 · BHA620650 · H620650 · 71402 · BH382876 · 9008094213 · 9094702A51 · BH141409
This part cross-references / interchanges with the following part numbers:
Which vehicles does this hose fit?
It fits the front right position on the 2004-2006 Lexus RX330, 2005-2007 Toyota Highlander, 2006-2008 Lexus RX400H and 2007-2009 Lexus RX350. See the Buyer's Guide tab for engine details.
What comes with the Sunsong brake hydraulic hose 2204832?
Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as the application requires. Hoses with banjo end fittings also come with new copper washers.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, FMVSS 106 and SAE J1401 standards. Each hose is high-pressure tested before it leaves the factory.
How is the tubing protected against corrosion?
The tubing is high-grade steel electroplated with a zinc coating. The coating resists rust and corrosion from humidity, road salt, water and grime.
What are signs a brake hose may need replacing?
Cracked, bulging or chafed hoses, fluid seepage at the fittings, or a soft or spongy pedal can be signs of a hose problem. Diagnose the brake system before replacing parts.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.