Sunsong Brake Hydraulic Hose P/N:2205964
Keep pressurized brake fluid moving to the front left wheel with the Sunsong brake hose, part number 2204833. This front left brake hydraulic hose is a direct-fit replacement for the 2004-2006 Lexus RX330, 2005-2007 Toyota Highlander, 2006-2008 Lexus RX400h, and 2007-2009 Lexus RX350. See the Buyer's Guide tab for engine details.
A brake hose is the flexible link that carries brake fluid from the chassis brake line to the brake at the wheel, so the suspension and steering can move while pressure is still delivered. Sunsong is a vertically integrated manufacturer of automotive fluid transfer hoses and lines, and it builds its hoses for exact form, fit, and function.
Hoses with banjo end fittings come with new copper washers for proper sealing. Signs a brake hose may need replacing include a soft or spongy pedal, fluid seeping at the hose or its fittings, and a hose that is cracked, bulging, or chafed. If the hose is the cause, this Sunsong brake hydraulic hose replaces it. Bleed the brake system after installation, following the service procedure.
Interchange: 1474-08260 · 073-1869 · 150.44082 · 350-76061
147408260 · 0731869 · 15044082 · 35076061 · BH620651 · SP11006 · BHA620651 · H620651 · 71403 · 609660 · BH382875 · 9008094214 · 9094702D51 · 9094702F65 · BH141410
This part cross-references / interchanges with the following part numbers:
Which position does Sunsong 2204833 fit?
This brake hydraulic hose is cataloged for the front left position on the 2004-2006 Lexus RX330, 2005-2007 Toyota Highlander, 2006-2008 Lexus RX400h, and 2007-2009 Lexus RX350.
Does the hose come with brackets or clips?
Sunsong includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required. Hoses with banjo end fittings also include new copper washers.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, FMVSS 106, and SAE J1401 standards. Every hose is high-pressure tested before it leaves the factory.
What are signs a brake hose may need replacing?
Signs include a soft or spongy pedal, fluid leaking at the hose or its fittings, and a hose that is cracked, bulging, or chafed. Inspect the system to confirm the cause before replacing parts.
Do I need to bleed the brakes after installing it?
Yes. Replacing a brake hose opens the hydraulic system, so bleed the brakes and check for leaks before driving, following the vehicle's service procedure.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.