Keep brake fluid moving to the front right wheel with the Sunsong brake hose 2204842, a brake hydraulic hose designed for exact form, fit and function. It is a direct-fit replacement for the front right position on the 2005-2012 Toyota Avalon and the 2007-2011 Toyota Camry. See the Buyer's Guide tab for engine details.
A brake hose is the flexible link between the vehicle's rigid brake line and the brake at the wheel. It carries hydraulic fluid while the suspension travels and the wheel steers. Sunsong is a vertically integrated maker of automotive fluid transfer hoses and lines, and it develops its products around what installers need.
A brake hose may need replacing if its outer cover is cracked, bulging or chafed, if fluid seeps at the fittings, or if the brake pedal feels soft or spongy. Diagnose the cause before replacing parts. After installation, bleed the brake system as directed in the vehicle service information.
Interchange: 1474-228253 · 073-1875 · 150.44089 · 350-76067
1474228253 · 0731875 · 15044089 · 35076067 · BH620675 · SP10556 · BHA620675 · H620675 · 71421 · 382365 · BH382365 · 90947A2011 · BH141226
This part cross-references / interchanges with the following part numbers:
Which position and vehicles does this hose fit?
It is cataloged for the front right position on the 2005-2012 Toyota Avalon and the 2007-2011 Toyota Camry. See the Buyer's Guide tab for engine details.
What standards does the Sunsong brake hydraulic hose meet?
Sunsong states its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards. Each hose is also pressure tested before it leaves the factory.
Are brackets and other mounting pieces included?
Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required for the application. Hoses with banjo end fittings also come with new copper washers.
What are signs a brake hose may need replacing?
Common signs include cracks, bulges or chafing on the hose cover, fluid leaks at the fittings, or a soft, spongy brake pedal. Inspect the system to confirm the cause before replacing parts.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes after the hose is installed. Follow the vehicle service information for the correct procedure and fluid.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
