Sunsong Brake Hydraulic Hose P/N:2204326
Keep brake fluid pressure reaching the wheel with the Sunsong brake hose, part number 2205527, cataloged for the rear left outer position. It is a direct-fit replacement for the 2012-2014 Ford F-150, the 2013-2014 Ford Lobo and the 2013-2014 Lincoln Mark LT. See the Buyer's Guide tab for engine-specific details.
Sunsong is a vertically integrated maker of automotive fluid transfer hoses and lines. It engineers this Sunsong brake hydraulic hose for exact form, fit, and function on the listed applications.
A brake hydraulic hose is the flexible section of the brake line. It carries hydraulic pressure to the brake while allowing for suspension movement. Signs this part may need replacing include cracking, swelling or bulging of the hose, fluid seepage at the fittings, or a soft or spongy brake pedal. If a failed hose is the cause, this unit replaces it. Diagnose the brake system before replacing parts.
Interchange: 150.65492 · 350-54666
BH621914 · BHA621914 · H621914 · 777698 · CL3Z2268A · DL3Z2268B · 683278 · BH383633 · 15065492 · 35054666
This part cross-references / interchanges with the following part numbers:
Which vehicles does the Sunsong 2205527 fit?
It is listed for the rear left outer position on the 2012-2014 Ford F-150, the 2013-2014 Ford Lobo and the 2013-2014 Lincoln Mark LT. See the Buyer's Guide tab for engine details.
What standards does this brake hose meet?
Sunsong states that its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards.
Does it come with brackets or copper washers?
Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as the application requires. Hoses with banjo end fittings include new copper washers.
What are signs a brake hydraulic hose may need replacing?
Common signs include cracking, swelling or bulging of the hose, fluid seepage at the fittings, or a soft or spongy brake pedal. Diagnose the cause before replacing parts.
Do I need to bleed the brakes after installing it?
Yes. Replacing a brake hose opens the hydraulic system, so the brakes must be bled to remove air. Follow the vehicle service information for the correct procedure.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.