Keep brake fluid pressure moving where the suspension flexes with the Sunsong brake hose 2205528, cataloged for the rear right outer position. This flexible hydraulic line is a direct-fit replacement for the 2012-2014 Ford F-150, 2013-2014 Ford Lobo and 2013-2014 Lincoln Mark LT. See the "Vehicles it fits" section for engine-specific details.
Sunsong is a vertically integrated manufacturer that researches, develops and builds automotive fluid transfer hoses and lines. It designs its products around what installers need and builds each hose for exact form, fit and function.
- Standards: Meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards.
- Installation pieces: Precision engineered to exact fit. Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required for the application.
- Zinc-plated steel tubing: The tubing is made from high-grade steel and electroplated with a zinc coating for corrosion and rust resistance against high humidity, road salt, water and grime.
- Pressure tested: Every hose goes through a high-pressure quality assurance test before it leaves the factory.
If a Sunsong brake hydraulic hose uses banjo end fittings, new copper washers are included to help seal the connection. A brake hose may need replacing if it is cracked or bulging, seeps fluid, or the brake pedal feels soft. Other brake faults cause similar symptoms, so diagnose the cause first. Bleed the brake system per the vehicle service information after installation.
Interchange: 150.65493 · 350-54667
15065493 · 35054667 · BH621913 · BHA621913 · H621913 · 777697 · CL3Z2267A · DL3Z2267B · 683277 · BH383634
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Which position does Sunsong 2205528 fit?
It is cataloged for the rear right outer brake hose position on the 2012-2014 Ford F-150, 2013-2014 Ford Lobo and 2013-2014 Lincoln Mark LT.
What standards does this brake hose meet?
Sunsong states it meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards. Each hose is pressure tested before it leaves the factory.
Does it come with brackets or washers?
Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required. Hoses with banjo end fittings include new copper washers.
How is the tubing protected against corrosion?
The tubing is high-grade steel electroplated with a zinc coating for corrosion and rust resistance against high humidity, road salt, water and grime.
What are signs a brake hose may need replacing?
A cracked or bulging hose, fluid seepage at the hose or its fittings, or a soft brake pedal may be signs of a worn hose. Other brake faults cause similar symptoms, so confirm the cause before replacing.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review